Part Location Diagram of 13031305863 Echo Air Filter Cover
See part B-11 in the diagram
( Grid squares measure 1x1 inch )

Air Filter Cover 13031305863

Manufactured by:
Echo
ERP Number:
ERP8858254
Part Number:
13031305863
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(25 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine OEM replacement part, this item is sold individually. The purpose of the part is to cover the air filter on the outdoor products shown below. It helps keeping larger pieces of debris from coming in contact with the air filter. While providing enough clearance for air to enter the carburetor through the air filter and mixing with the fuel to make the unit run properly.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
  • Little Wonder
This part works with the following products:
  • Trimmer
  • Pole Saw
  • Hedge Trimmer
  • Leaf Blower / Vacuum
  • Edger
  • Chipper Shredder
  • Water Pump
Part# 13031305863 replaces these:
13031305863,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(25 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Wing bolt vibrated out and lost air cover and filter.

George from Elizabeth City, North Carolina

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Installed new filter and reattached cover with new wing bolt. I also ordered an extra wing bolt in case this happens again.
Did you find this story helpful?
Thank you for voting!

Trigger throttle was broken, all fuel lines frayed

Robert from Humble, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed the throttle trigger from handle, replace with new one, remember how the spring is attached. Removed fuel line grommet from tank. replaced both fuel lines and vent tube. Removed clip from fuel line and replace fuel filter, secured with clip. Installed grommet. Also replace the worn fuel cap and dented air filter cover
Did you find this story helpful?
Thank you for voting!

Filter, cover and wingnut was missing

Steve from Dinwiddie, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Just installed new items and bam, back to work
Did you find this story helpful?
Thank you for voting!

Air filter,screw and filter cover were missing

Randy from Ardmore, Oklahoma

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1. Installed wing bolt into cover
2. Installed filter on trimmer
3. Placed cover, filter and tightened wing bolt
Did you find this story helpful?
Thank you for voting!

low power

James from Madison, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Replaced the spark plug, air filter, fuel filter, and muffler components to improve air, fuel, and exhaust flow. Used a hooked pick to pull the fuel filter from within the gas tank. Had to make a new fuel line wire clamp.

Very easy to compete the tune up.

The result seems to have justified the repairs.
Did you find this story helpful?
Thank you for voting!

Lost the cover and filter and bolt.

John from Satsuma, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
I installed the air filter into the air filter base, then attached the air filter cover with the wing bolt.
Did you find this story helpful?
Thank you for voting!

coil failed

bill from batavia, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
removed coil and installed new one
Did you find this story helpful?
Thank you for voting!

Many ..carb..fuel lines..gas tank..gas cap.spark plug..air filter

Rickey from MIMS, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
21041752730, 13031305863
Remove and replace
Peace of cake
Did you find this story helpful?
Thank you for voting!

Choke lever for cold start would not operate. Air filter cover broken & securing bracket bent

Mike from Houston, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
13031305863
Removed air filter cover and unscrewed bent underlying bracket. Replaced with new bracket, air filter and cover. Edger started up easily after repair.
Did you find this story helpful?
Thank you for voting!

Air filter cover fell off during transit.

Don from SEVEN VALLEYS, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
13031305863
The cover didnGÇÖt come with a screw so I had to search through my thousands of miscellaneous screws.
ItGÇÖs good to have a supplier with an easy to use website, simple order process and reasonable freight costs.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP8858254
Manufacturer Part Number: 13031305863
Brand Model Number Description
Little Wonder 9555 Leaf Blower / Vacuum - Mantis Blower/Shredder Vacuum
Shindaiwa DH212 Hedge Trimmer - Hedge Trimmer
Shindaiwa EB212 Leaf Blower / Vacuum - Blowers Hand Held
Echo EDR-260 Engine - Keyless Chuck Engine Drill
Echo ES-210 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-250 Chipper Shredder - 25.4 cc Shred 'N' Vac
Echo ES-252 Chipper Shredder - Echo Shred N Vac Shredder/Vacuum
Echo GT-200 Trimmer - Curved Shaft Grass Trimmer
Echo GT-200EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-200I Trimmer - Curved Shaft Grass Trimmer
Echo GT-200R Trimmer - Curved Shaft Grass Trimmer
Echo GT-201 Trimmer - String Trimmer
Echo GT-201EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-201I Trimmer - Curved Shaft Grass Trimmer
Echo GT-201R Trimmer - Curved Shaft Grass Trimmer
Echo GT-230 Trimmer - String Trimmer
Echo HC-150 Hedge Trimmer - Hedge Clipper
Echo HC-150I Hedge Trimmer - Hedge Clipper
Echo HC-151 Hedge Trimmer - Hedge Clipper
Echo LHB-2100 Leaf Blower / Vacuum - Lesco LHB-2100 (After S/N 005851)
Echo LHD-1700 Hedge Trimmer
Echo LHS-3000 Hedge Trimmer - Lesco LHS-3000 (After S/N 002502)
Echo LHS-3050 Hedge Trimmer - Lesco LHS-3050 (After S/N 001001)
Echo LHS-4050 Hedge Trimmer - Lesco LHS-4050 (After S/N 001001)
Echo LST-2100 Trimmer - Lesco LST-2100 (After S/N 008650)
Echo PAS-230 Trimmer - Gas Power Source Attachement
Echo PB-200 Leaf Blower / Vacuum - Handheld
Echo PB-2455 Leaf Blower / Vacuum - Handheld Blower
Echo PB-250 Leaf Blower / Vacuum - 25.4cc Handheld Blower
Echo PB-250LN Leaf Blower / Vacuum - 25.4 cc Handheld Blower