This replacement grommet is an authentic OEM item that is produced for use with Echo gas powered equipment. It fits in the fuel tank to secure the hose and seal the opening. Over time it may deteriorate and crack eventually requiring replacement. It is made from durable rubber material and it is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Replacing Mantis Fuel Line Grommet
Part was exactly as ordered, arriving in just a few days. Repair went well, as grommet was very snug and required some work to get fuel line inserted. But, that's what I needed in order to stop the fuel dribble. A very successful repair and will keep that little tiller working another 20 years.
Guest - May 31, 2019
Verified Purchase
★★★★★
★★★★★
Saved by the aftermarket
Hard to find parts at good prices delivered promptly. My tiller will live to plow another day.
Guest - April 27, 2021
Verified Purchase
★★★★★
★★★★★
Great customer service
You better get great customer service when the part costs $10.00 shipped ($5.95 shipping) and should be $5 ($2.99 shipping). Still, more reasonable shipping and prices than others.
Guest - June 20, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Installed the new gas filter inside the tank.
2. Installed new gas line and the grommet on the tank.
3. Rebuilt carburetor with the kit.
4. installed new spark plug
Ran well after installing the above parts.
Did you find this story helpful?
Thank you for voting!
In need of new fuel tank and fuel line grommet grommet. Original Mantis SV-4
Purchased fuel tank, 13100511521. Tank is sourced directly from manufacturer so everything was identical to original tank except that they have increased the size of the fuel outlet hole to match their newer models.
If your making the same repair/replacement be aware that the fuel grommet being sold to match the tank (13211504920)
... Read more WILL NOT WORK, they are too small for the tank outlet. If you have already bought the wrong grommet use a short piece of 3/8\" ID X 5/8\" OD fuel line about an inch long, to stick in the hole. Your fuel grommet will fit tight inside of this line with no leaks. Make sure the 1\" piece is for fuel and made of the old fashioned nitrile rubber.
Took the starter apart new rope and a bit of oil on the center pin works like new.
Old gas in the tank had to replace fuel line and filter.
Tank leaked, changed the grommet, no leak.
Rebuild Carb with odds and ends.
Started on 5th yank, runs great now.
Took gas tank off, fished out the gas tube with the filter, replaced filter on new tube through the new grommet and installed new grommet on the tank. Put the tank back on.
Did you find this story helpful?
Thank you for voting!
Air filter and on/off switch needed replacing. Parts and procedure very simple. Fuel line grommet needed in order to stop dribble from fuel tank.
Replacement of air filter and switch are obvious. Take off the old, replace with the new. (Don\'t try to solder the wire to the switch tag because it will melt the switch internal parts. Use a connector or crimp the bare wire to the tag and seal with tape or shrink wrap.) Fuel line grommet was a bit complicated because Mantis has chang
... Read moreed fuel line and grommet diameter design over the years. The diameter of hole in tank and diameter of grommet might require some adjustments, depending on year of your equipment. The grommet I received did fit the tank perfectly, but the fuel line was just a bit tight fitting through the grommet. I had to work it fairly vigorously to get it through, but it did fit and works great. Tight to tank, and tight to fuel line. No leaks now.
Removed old gas tank grommet.
Removed gas line from carb and removed gas line through old grommet.
Put gas line through new grommet using long nose needle nose plyers
Put in new grommet in gas tank using small screwdriver to push it in gas tank hole
Connected gas line to carb
The new gas tank grommet stopped
... Read more the gas leak
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8863912
Manufacturer Part Number: 13211504920
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
