This is an OEM sourced replacement part designed for use with Makita drills/drivers. It allows user to secure drill bits. The ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill\'s bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. Please note the screw used to secure this chuck it is sold separately.
Keyless Drill Chuck 766027-7
OEM part for: Makita
Part Number: 766027-7
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 45 machines
Makita
This item works with the following types of products:
- Drill Parts
- Cordless Drill Parts
- Hammer Drill Parts
This part replaces obsolete part #: 766008-1, 763193-1
Repair Videos ?
Broken gearboxes and sticky chuck screws can make removing a drill chuck difficult. This article explains the tricks you...
August 12, 2010
|
Drill Chuck Stuck? Step-by-step instructions show you how to remove a drill chuck when the retaining screw is stripped, ...
April 18, 2016
|
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Keyless Drill Chuck
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chuck was jammed in closed position with a square bit in it.
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Chuck worn out
Tool Type
Cordless Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Star drive, long #45
Parts Used
Drill chuck disintegrated while drilling
Tool Type
Cordless Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench, Sawzall
Parts Used
2. Unscrewed screw holding drill chuck
3. Attempted to unscrew the body of the drill chuck with adjustable wrench
4. Attempted to unscrew the body of the drill chuck with an adjustable wrench and vise.
5. Cut off most of the body of the drill chuck with a sawzall
6. Unscrewed remaining body by hand
7. Screwed new drill chuck onto drill
8. Screwed in retaining screw.
Drill chuck failure
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
2. Back the chuck off the drive stem, the chuck has right hand threads, so it backs off by left hand rotation.
3. Inspection of components, all looks good and matches.
4. Screw the chuck on till it bottoms out.
5. Insert the retainer screw and tighten down.
6. Tested chuck, all systems in good working order.
Slipping gear box
Tool Type
Hammer Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
2. Remove gear box with chuck, hammer drill chuck is right hand screw, to prevent chuck loose with reverse rotation, inside chuck has left hand pan head slotted screw. Removing left hand screw is easy using impact driver, however, I expect chuck, right hand screwed may not loose due to hummer action operation too many times. So I bought a gear box and a chuck.
3 Attach chuck to gear box.
4.Insert gear box/chuck inside case/cover. perfect alignment/position of all parts will be required before case/cover closing together.
5. Return self tapping screws, even self tap screws should not be "cross screw".
6. I don't know the best way to remove chuck from gear box. Anyway gear box is useless, remove all gears from gear box and use special tool, chuck may be removed.
7. My hammer drill has BL motor and last longer so it can be equivalent a new hammer drill after replace gear box.
Drill chuck was worn and gearbox was not working as it should
Tool Type
Cordless Drill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Allen wrench
chuck would not hold drill bits under load
Tool Type
Cordless Drill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, 7 inch long 3/8 allen key, hammer
1. Set drill power level on "1", "drill" setting. Important
2. Hand-twist until fully open drill chuck
3. Insert long flat edge screwdriver and turn clockwise (reverse threaded) to remove drill chuck screw.
4. Secure drill to edge of workbench. Insert allen key. Be sure to open the chuck fully by turning by hand several revolutions against resistance. Use hammer to whack allen key and unthread chuck. It may take quite a few tries.
OPEN DRILL CASE AND REMOVE GEAR ASSEMBLY
5. Unscrew drill case using Philips head screwdriver. Separate case. Be sure the trigger stays in proper position.
6. Pull back metal tab resting on armature.
7. Free white plastic gear assembly. Note the bottom of the armature assembly has a notch for alignment in the case. There's also a line on top of the armature for alignment.
8. Insert new gear assembly. It can be fussy.
9. Reassemble case, making sure trigger is working.
10. Once assembled thread on new chuck, being sure to keep the chuck wide open.
11. Insert chuck screw and thread counterclockwise to tighten.
12. Watch YouTube videos.
One of the 3 gripping tooth of Chuck was broken.
Tool Type
Hammer Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Motor ran, but drill didn’t power drill bit
Tool Type
Cordless Drill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Parts Used
Broken chuck tooth.
Tool Type
Cordless Drill
Difficulty
Hard
Time
15-30 minutes
Tools Used
Screwdriver, Allen Wrench, Hammer, penetrating lube
Parts Used
2. Attached a large right angle allen wrench in the chuck.
3. With the drill on low gear, smacked the allen wrench with a hammer hard until the chuck spun. This was the most difficult part as it needed to be done with a quick blunt force that was hard to achieve.
4. Unthreaded the bad chuck and installed the new chuck without hammering the new chuck into place.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.