Watch The
Repair Video

Intake Insulator

Part Number: P021015350

1 Reviews

Order within the next 6 minutes

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: and 13001744330.

Product Information

Manufacturer: Echo, Shindaiwa

Product Number: P021015350

Classification: Part

Weight: 0.06 lbs.

Shipping: Ships Worldwide

Description:

This item is sourced from the original manufacturer to be used with hedge cutters, trimmers, gas-powered drills, and pruners from Echo and Shindaiwa. This item is used to provide spacing and to deflect heat between the carburetor and the cylinder. This item is available as an individual replacement part.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Shindaiwa

DH212 (S78311001001 - S78311999999) Hedge Trimmer

Echo

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Drill
• Grass Trimmer
• Hedge Trimmer
• Trimmer

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Intake Insulator - P021015350

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Intake insulator cracked

Remove the air cleaner assembly. Then remove the screws securing the carburetor. And remove the carburetor and gasket. Remove the screws from the cracked insulator, then install the new one. Install the parts that you removed in reverse order and you're done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Intake Insulator - P021015350

Intake Gasket - V103001360

Air Purge Body Assembly - P005000930

Purge Bulb - P005003120

Carburetor Repair Kit - P005002280

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Did not idle correctly

I decided to replace the primer, clean the carburetor, and replace gaskets.
• Take off the cover and spark plug boot.
• Disconnect fuel lines from carb, and loosen carb to remove the choke and throttle cable.
• Open carb and clean the internal parts using aerosol carburetor cleaner.
• Reassemble carburetor using the gaskets in the kit and attach choke, throttle cable, and fuel lines.
• Reassemble the air cleaner and install the gaskets and put the cover back on.
Runs good now!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pruner

Parts Used:

Intake Insulator - P021015350

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Nutdriver

Insulator was broken

Disassembled the unit took carb & removed the broken one out & replaced it with new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Intake Insulator - P021015350

Intake Gasket - V103001360

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

I dropped the machine on the floor and cracked the intake manifold.

With the new parts I ordered. I was a fairly simple fix. Make sure to order the gasket kit ,too. Also if it's and older machine buy new gas line kit. While the carb is off you should change the lines.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Intake Gasket - 13001013410

Intake Insulator - P021015350

Intake Gasket - V103001360

Wing Bolt - 21041752730

Air Filter Cover - 13031306563

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Trimmer had broke during a fall and sat for over 4 years not being used.

1. Removed part assemblies to get to broken insulator.
2. Replaced gaskets as necessary.
3. Re-assembled.
4. Primed engine and trimmer started right away.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Intake Insulator - P021015350

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set

Trimmer fell off shelf and insulator cracked

1) Removed old insulator
2) Installed new insulator

*When device fell spark plug was damaged as well. So spark plug was replaced and device is as good as new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

1 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Echo strimmer

Replacement, fits a cracked carburetta intake insulator on an echo strimmer - perfect

martin - June 3, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Manufacturer: Echo, Shindaiwa

Product Number: P021015350

Classification: Part

Weight: 0.06 lbs.

Shipping: Ships Worldwide

Repair Guides

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015