eReplacementParts.com
866-322-9842
DeWALT Parts
Repair Parts Home  Power Tool Parts  DeWALT Parts  151281-08 Hook and Loop Sander Pad

Hook and Loop Sander Pad

Part Number: 151281-08
Porter CableDeWALTBlack and Decker
Availability: 25+ in stock
Price: $22.93
Quantity:
Order within the next 4 hours
and your part ships today!

*This part replaces obsolete part #: and 151281-06.

Product Information
Manufacturer: Porter Cable, DeWALT, Black and Decker
Product Number: 151281-08
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Description:
The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes.

Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper)

Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad.
When a pad needs to be replaced, simply remove the three screws that hold the pad to the sander, then replace it with a new pad.

Products Compatibility

This item works with the following types of products:

  • • Sander
Questions & Answers

Is there a 6'' Backing pad for the D26453 available...
cori.venter for model number D26453 type 1
Hello Cori and thank you for writing -Part #151281-08 is in the list of compatible items for your model. Hope this helps
I need a new pad but do not want a hoop and loop. Can l get a pad for p/s discs.
Ted for model number 382
Hello Ted, Thank you for the question. Very sorry but checking the model number. The only pad listed is the Hook and Loop Sander Pad, Part Number: 151281-08. Thank you for your inquiry, good luck with this repair!
Will this part fit a Craftsman pro 5" random orbital?
randy biskner for model number 900.277070
Hi Randy, Thank you for your question. This would not be the correct sander pad for your model. The part number listed under your model number for the sander pad is 151281-08. I hope this helps. Thank you and have a great day!
I need to get a new wrench (that came with the tool). Do you have this item in stock?
Dan Thomas for model number DWE6401
Hello Dan and thank you for writing Wrench -Part # N114483 is in the list of compatible items for your model. Hope this helps
Will this pad fit my BD5200? Black & Decker BD5200 5' VS Random Orbit Sander Part Number: 797157-01
Ray Hooper for model number Black & Decker BD5200
Hello Ray and thank you for writing No Part # 151281-08 is not in the list of compatible items for your model. Hope this helps We looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps
Repair Instructions: Submitted by Customers Like You
35 of 37 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hook and loop would not hold sandpaper
Removed three screws holding old pad and replaced with new one. Easy repair that saved the price of a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
12 of 14 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Torx style screwdriver
The original sander pad had deteriorated.
The only special tool you will need is a torx style screwdriver. It is a simple matter of removing the 3 screws that hold the pad to the sander and it should only take a couple minutes to remove and replace the sander pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
9 of 11 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Replaced the sander pad
Took off the old pad by removing the 3 screws holding it on. Put the new pad on. Then began to use the repaired sander. Instead of spending over $70, total cost was a little over $20.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Sander
Parts Used:
On-Off Switch - 144960-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bad switch and pad wore out.
Removed top cap of sander. Noted where the wires where located on the switch. Removed switch cover. Connected the wires to the new switch. Put switch cover on, then installed new switch and put switch cap on. For the pad. I removed the 3 screws from the old pad, and put the new pad on the sander with the 3 screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Spring - 151442-02
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Just a flathead screwdriver
Velcro pad worn out and brake and springs severely worn.
Unplug sander, remove pad screws, take off pad and remove break. Springs are located on brake. Remove springs and install new ones and if the break pad is worn and speed cannot be controlled, replace break pad and springs. Place new or repaired break assembly on sander, and then Velcro pad and insert the 3 retaining screws. Plug back in and get to work!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sanding pad was breaking apart due to dry rot
Unscrew the 3 screws holding sanding pad on
Remove old pad
Screw new pad back on orbital sander
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sanding pad was coming apart.
Removed old pad & installed new one. It was very easy only three screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Polisher
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, torex
Worn pad
Remove 3 screws from old pad. Install the new pad with the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Screw,Machine - 098012-11
Washer,Cone - 151652-00
Bearing Retainer - 603637-00
Bearing Retainer - 603664-00
Bearing - N110363
Screw - 146929-01
Brake - 624302-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver
Sanding pad was worn out and the bearing retainers were broken
Replaced all broken and worn parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hooks were worn out
Replaced pad. Easy off with the old, on with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.5
Average Rating (out of 5):
15 Reviews
Click to filter by ratings:
5 stars
13
4 stars
0
3 stars
0
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • This sander pad fit perfectly.
    This item arrived quickly. I needed to replace a damaged pad. Now I can get on with my projects.
    Guest - 4 days ago Verified Purchase
    Great
    Great! Worked well.
    Guest - 4 days ago Verified Purchase
    Just what I needed
    The part was correct for my sander and arrived very quickly. Great!
    Guest - August 6, 2019 Verified Purchase
    Helpful service-perfect replacement
    I ordered the wrong part and the customer service was friendly and helpful. Got the perfect fit with no hassle.
    Guest - June 29, 2019 Verified Purchase
    Always
    Always great pricing quick shipping and awesome products
    James - June 28, 2019 Verified Purchase
    Paid way to much for the part from eReplacmentParts
    The part was more expensive than going to a department store for it.
    Guest - June 18, 2019 Verified Purchase
    Easy repair glade you had the part.
    Part worked great. Shipping for this light weigh part was way way to much. Need to update shipping rates and make them reasonable.
    Guest - June 18, 2019 Verified Purchase
    worked as expected
    Arrived in good time, right part, perfect fit
    iGlobal - June 7, 2019 Verified Purchase
    peerfect fit-excellent part
    excellent transaction
    Guest - June 5, 2019 Verified Purchase
    arrived on time.
    fit perfect on my unit.
    Guest - May 20, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    NEXT >
    Product Information
    Manufacturer: Porter Cable, DeWALT, Black and Decker
    Product Number: 151281-08
    Classification: Part
    Weight: 0.06 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Hook and Loop Sander Pad
    How to Replace the Sanding Pad on a Porter Cable Sander
    Articles:
    How to Replace the Sanding Pad on a Porter Cable Sander
    Step-by-step instructions for removing and installing the hook-and-loop sanding pad on your Porter Cable sander....
    January 11, 2018
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy