eReplacementParts.com
877-346-4814
DeWALT Parts
Brake

Brake

Part Number: 624302-00
DeWALT
Availability: 25+ in stock
Price: $2.99
Ships within 1 business day
Product Information
Manufacturer: DeWALT
Product Number: 624302-00
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
Genuine Dewalt replacement part, this item is sold individually.
The purpose of the 624302-00 Brake is to keep the sanding pad of the Random Orbit Sander at a slower speed so that the sander can sand the stock properly.
A good time to replace the Brake is when you replace the sanding pad.
Or replace it when the pad is spinning out of control at high RPM.
Products Compatibility

This item works with the following types of products:

  • • Sander
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Tork Screwdriver
A piece of string got caught under the sanding pad and burned the brake
I removed the sanding pads and disk driver with Torx bit and battery powered screw gun. Removed the brake which locks in place without any screws. Replaced with new one and reassembled pad driver. New part has no metal parts to it, old part did so not sure why the difference will see if that creates a problem next time I use it. (DeWalt Palm Sander)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Switch Cover - 144983-07
Brake - 624302-00
Spring - 151442-02
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Worn parts
Remove the top cover of the the sander, then you have access to the switch, remove the old switch cover and put on the new one. The screw the top back on. Then remove the sanding pad by removing three screws, then remove the pad. Take the worn brake off and the worn springs. Put the new springs on the brake and install the brake. Then install the sanding pad. Then sand away.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hook & Loop pad and brake needed
Ordered a pad assembly and a brake. The pad and brake were attached with three phillips head screws. Repair was less than 15 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Screw - 146929-01
Brake - 624302-00
Spring - 151442-02
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
brake flew off
after receiving parts installed springs, and brake,which gave me a little problem getting balance just right , put pad on and machine works great,very happy!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Palm sander not working
Unscrewed disc removed and replaced disc brake
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Retainer ( Includes Self Tapping Screws) - 286181-00
Bearing Retainer - 603664-00
Bearing - N110363
Brake - 624302-00
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, press
retainer failed
removed old retainer and bearing. pressed new bearing into retainers. installed new assembly, good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Spring - 151442-02
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Dewalt orbit sander part broke
1-removed 3 screws to remove pad
2-removed/replaced brake and springs
3-reinstalled pad and screws
Pretty easy to repair about 15 min and $12.00 parts/shipping verses buying new sander for $80.00
1st time for me to repair my own tools!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Spring - 151442-02
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
sanding pad worn brake worn springs worn
ordered new pad brake and springs
removed screws from pad, remove, removed brake and springs
brake lifts off removed spring with pliers
applied springs in brake , screwed pad back in
done
like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad was worn out and the bearing retainers were broken
Replaced all broken and worn parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Brake - 624302-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brake was bad
Removed the 3 screws holding sanding pad on then changed the brake out under it and replaced the pad
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brake - ( 624302-00 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Orbital Sander Problem

1236579

I own a DeWalt orbital sander Model No. D26453. After many hours of use the sander will oscillate but not rotate when pressure is applied to the working surface. What could be causing this?
Hi,
Replace Bearing (6202DW) Part Number: 330003-75. Also you might consider replacing Brake Part Number: 624302-00 while you have it apart.Hope that helps.Good luck.
Tinker
Thank you for your help
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Brake
    The part is fine but the post office took way to long to deliver this. Once it got to my city its seemed like it got lost as it sat before showing it finally out for delivery.
    Guest - 5 days ago Verified Purchase
    easy repair, parts arived quick and fit great
    as stated in title above
    Guest - April 6, 2020 Verified Purchase
    Easy repair!
    Recieved parts in time to keep our shop on schedule.
    Guest - March 23, 2020 Verified Purchase
    Easy fix.
    good parts at great prices.
    Robert - February 10, 2020 Verified Purchase
    Quick shipping
    Part fit like new and my DeWalt sander is working great again.
    Guest - January 18, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT
    Product Number: 624302-00
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal