eReplacementParts.com
877-346-4814
DeWALT Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  DeWALT Parts  151553-00 Dust Seal
photo thumbnailphoto thumbnail360 degree photo thumbnail

Dust Seal

Part Number: 151553-00
DeWALTBlack and DeckerPorter Cable
Availability: 25+ in stock
Price: $7.58
Ships within 1 business day

*This part replaces obsolete part #: and 151553-01.

Product Information
Manufacturer: DeWALT, Black and Decker, Porter Cable
Product Number: 151553-00
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
Genuine OEM replacement part, this item is sold individually.
The 151553-00 Dust Seal/Brake is a dual propose part.
It is a Dust Seal to help prevent dust and debris from entering the motor assembly.
It also acts as a Brake to keep the sanding pad at lower RPM so the sander will work properly.
It is a good idea to replace this part when you are replacing the sanding pad.
Products Compatibility

This item works with the following types of products:

  • • Sander
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sanding break worn out
I removed three screws from the sanding pad, then removed the pad. The you can just take the dust seal/brake off with your hand and place the new one right back on. The just install the sanding pad back on with the three screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brake not working
Remove three torx screws on sanding pad, pop out old seal, snap in new seal, replace sanding pad. Takes about 45 seconds.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sanding pad spinning too fast
Remove 3 screws from pad, snap out old seal, snap in new seal, put it back together. Takes 90 sec.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Ball Bearing - 605040-27
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Torx bits
Sander no longer did the random orbit
Checked out problem, took sander apart, remove bad parts and install new parts after they arrived.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Ball Bearing - 605040-27
Retainer ( Includes Self Tapping Screws) - 286181-00
Bearing Retainer - 603637-00
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Torx head bit
Self tapping screw came loose and stripped out
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Ball Bearing - 605040-27
Dust Seal - 151553-00
O-Ring - 56194-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Repairs went well.
Replacement parts site supplied the the list of parts needed to repair the malfunction of my sander, they also described the malfunction. It doesn't get any better.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brake and pad hook wore out
Removed existing parts by taking 3 screws out. Then replaced with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Hook and Loop Sander Pad - 151281-08
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Replace pad and seal
Remove screws in pad replace seal and install new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Random orbital sander over-speed
Replaced dust seal/brake under sander pad - removed several screws to remove pad replaced part under pad and installed pad. Very easy. Sander works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Dust Seal - 151553-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Star point screw driver
Sanding pad spun out of control, very fast
Removed the sanding pad by removing three small star bolts
Removed sanding dust from the bottom of the sander and pad
Pulled out the old plastic Dust Seal/Brake
Aligned and inserted the replacement Seal/Brake
Replaced the sanding pad with the three small star bolts
Tested the sander, worked like new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Dust Seal - ( 151553-00 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Look In The Case!

Never_Reads_Instructions

I ordered a couple of these because mine wore out. After cleaning it real nice, I decided to clean the case as well before I put it away. When removing the paperwork, I discovered that a spare had been included. Now I feel like an idiot, but I have 2 spares...
WJA
Hello Never_Reads_Instructions,

Don't worry one day you'll need it.

-WJA
Reviews
5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • dewalt sander part
    as of today, I have not received this item.
    Marshall - March 22, 2021 Verified Purchase
    Dust seal
    I got the part is looking for, the online schematic make it so easy to lookup parts
    Guest - January 13, 2020 Verified Purchase
    runaway speed fixed.
    arrived quickly, fixed problem, easy to replace.
    Guest - September 29, 2019 Verified Purchase
    As always, the right parts for the needed repairs.
    I have been a customer of eReplacementParts for 5 or 6 years, have always been pleased and have recommended them to a number of my friends. The exploded views and the list of suggested parts for a particular problem with the appliance, tool, etc. are very helpful in finding the appropriate parts. Every time I need to find a part of any kind, the first place I check is eReplacementParts.
    Guest - September 15, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT, Black and Decker, Porter Cable
    Product Number: 151553-00
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Dust Seal
    Articles:
    Step-by-step instructions for removing and installing the brake on your Porter Cable sander....
    January 11, 2018
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal