eReplacementParts.com
877-346-4814
Ryobi Parts
Repair Parts Home  Power Tool Parts  Ryobi Parts  300527002 Hook and Loop Disc Assembly
photo thumbnailphoto thumbnailphoto thumbnail

Hook and Loop Disc Assembly

Part Number: 300527002
Ryobi
Availability: 25+ in stock
Price: $7.18
Order within the next 40 minutes
and your part ships today!

*This part replaces obsolete part #: 3052701 and 4600506.

Product Information
Manufacturer: Ridgid, Ryobi
Product Number: 300527002
Classification: Part
Weight: 0.08 lbs.
Shipping: Ships Worldwide
Specifications
  • Size: 5-Inch
Description:
This pad is used on Ryobi and Ridgid Random Orbit Sanders.
it is sold individually.

Its purpose is to use 5 inch Hook and Loop 8 hole sandpaper attached to it.

To make the pad last longer do not put to much pressure on the sander when using it,the pressure will create heat and ruin the small hooks on the pad.

To replace the pad simply remove the four screws attaching it to the sander and replace it with a new pad.

If you would like to use a 5 inch 8 hole PSA (Pressure Sensitive Adhesive) pad, the part number is 300527003.

Products Compatibility

This item works with the following types of products:

  • • Sander
Questions & Answers

Appears this part 300527002 should fit my Craftsman sander, correct??
phil for model number Craftsman 315.279890
Hi Phil, Thank you for your question. Yes, this would be the correct hook and loop disc assembly for your Craftsman sander. I hope this helps. Thank you and have a great day!
how far apart are the 4 holes used to screw on the velcro pad? My holes are 4 1/4" apart. I purchased a velcro pad elsewhere and the holes did not line up.
dan diamond for model number tacklife 5"
Hi Dan, Thank you for your question. The distance between the screw holes is approximately 1 inch apart. I hope this helps. Thank you and have a great day!
Will this loop and hook 5 inch work on my 4 1/2in Ryobi lorbital sander RS-115. Is the hole pattern the same?
Charles for model number RS-115
Hello Charles, Thank you for the question. This Hook and Loop Disc is for 5" and will not fit the 4.5". The holes will not line up. I looked up the part for your model number and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Will this work for model # Rs290?
Drew for model number Rs290
Hello Drew, thank you for your question. Unfortunately, that part is not listed as a compatible replacement. The correct replacement hook and loop unit for your model is Hook and Loop Backing Pad Part Number: 030157001018. Good luck with your repair!
does the assembly come with the sticky velcro?
Dennis
Hello Dennis, Thank you for the question. This pad is held in place with screws. Hope this helps, good luck with this repair!
I need the hook and loop pad that holds the paper. I see prices of $7.00 each to $18.18 each?
Ron for model number RS290
Hello Ron, Thank you for contacting us. I have researched the model you have provided and have found the part you?re looking for is Part Number: 030157001018. Thank you for your inquiry, good luck with this repair!
#1IS this a RANDOM orbital or just a Palm sander #2 does it have variable speed? And if so is there an adjustment on it?
James for model number RS290
Hi James, Thank you for your question. This is a Random Orbit Sander and it has no load speed (rotational speed, at no load). For more information on the sander, you will need to consult the owner's manual. Here is a link to the manual, http://manuals.ryobitools.com/system/files/6075/original/RS290_RS290G_172_trilingual_07.pdf?2018. I hope this helps. Thank you and have a great day!
Will this fit my Ridgid sander?
Marcus Sucro for model number R8606
Hello Marcus, thank you for inquiring! We are showing the correct part for your model is 300527008. We hope this helps, and have a great day!
My sandpaper doesn't stay in the sander, do I purchase the #300527002 ? Does that part come with the H&L to hold the new sandpaper?
Tom for model number R2600
Hello Tom, Thank you for your inquiry. I have researched the model you have provided and have found the part you are looking for is 300527002. Good luck with your repair.
Will this pad fit my dewalt 6421?
Cindy Higgins for model number dwe6421
Hello Cindy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: N329079. Thank you for your inquiry, good luck with this repair!
I think this part # is obsolete but iit is a hook and loop backer pad. Having difficulty with discs adhering to pads. Will a self-adhesive backer pad work just the same.?
David for model number 4600506
Hello David, thank you for contacting us. We will have to check to see what is available for parts for your unit, but we will need the unit's model number to do so. We look forward to hearing back from you.
it says this is a 5" disk but the picture clearly shows a 4.5" disk. which is it?
brett
Hello Brett, thank you for your question. This is a 5 inch disk. I hope this helps.
Can I order a set of screws for this model sander. Brought a new pad at Home Depot but they don't carry the screws to hold the pad in place.
Richard Robbins for model number A21BP01
Hello Richard, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
will this part fit a Chicago electric orbital sander 93431 my screw holes are 1" apart
paul Christiana
Hello Paul, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Hello, Does this also replace same part on Craftsman model # 315.116950 orbital sander?
Harry C. Whalen for model number 315.116950
Hello Harry, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 030157001018. Part number 300527002 is not listed as a compatible part. Hope this helps, good luck with this repair!
Need to replace the hook/loop backing pad. What is the difference between your p/n 300527002 ($7.18) and your p/n 030157001018 ($18.18).
Gary for model number RS290 orbit sander
Hello Gary, Thank you for your question. 300527002 is 4.5 inches in diameter and part number 030157001018 is 5 inches. Hope this helps!
Your reply to my question is incorrect per your data sheet. 300527002 says it is 5 inch. And 030157001018 is also 5 inch. So why is ...7002 $7.18 and ...1018 $18.18? What is the difference between the two backing pads?
Gary for model number RS290
Hello Gary, Thank you for contacting us. The Part Number: 030157001018 is the part listed for your model number RS290. RS290 is listed for the RS290G. They holes could line up different or be a different size. It is best to use the one listed for your model RS290. We base our prices on what we are charged by the manufacturer for the parts. The manufacture has different pricing so it effects our pricing. Hope this helps!
I need a pad for this sander
Russell Hinton for model number R2611
Hi Russell, thank you for your question. Alright, I have linked the correct part for your tool down below for you. Good luck with your repair.
When do ireceive it
Steve Pojda
Hello Steve, thank you for your inquiry! We are a little confused in regards to the question asked. Have you placed an order and are looking for an ETA? Or are you looking for shipment time frames? In each case, if you have placed an order please call our customer service number to be updated on delivery and if you need a shipping quote please add your item to the cart and input your zip code at the bottom of the cart page to get different shipping options. Thank you.
How do you attach sandpaper
David Duncan for model number ryobi G0343 44735
Hello David, thank you for your question. This Disc Assembly is hook and loop, meaning you would need hook and loop sand paper as well so they will stick together. The model number you provided is not recognized. If you can provide the model number for your unit, we can check the compatibility to your model, or locate the correct Pad for you.
Will this hook and loop pad for the Rigid R2600? It appears to be the same. Thanks in advance.
Chad for model number R2600
Hello, Thank you fr your question. Part number 300527002 is a match for model R2600.
Will this fit in a Bosch orbital sander?
Kristen
Hi Kristen, Thank you for your question. To verify the correct hook and loop disc assembly for your model, we would need the model number from it. Thank you and have a great day!
I need a replacement
John for model number RS-115
Hello John, Thank you for the question. You can enter the part number into the website and there will be a add to cart button to proceed with the order and choose your shipping method. You can pay with Credit card or PayPal on the site. You can also contact customer service if you need help placing an order for the Hook and Loop Disc. Hope this helps!
Question ,does it fit 5 inc.RYOBI RS281VS .Part no.300527003
sam for model number RYOBI sander RS281VS
Hi Sam, this part 300527002 is fully compatible with RS281VS. Thank you for your question and good luck with your repair!
Had the RS240 for years will this pad fit it?
Hal for model number RS240
Hello Hal, thank you for your inquiry! We can confirm that hook and loop disc 300527002 is compatible with your model RS240. I hope this information helps!
This replacement 5 inch.Hook/loop part fit an old Ryobi RS-112 orbital sander?
Owen for model number 300527002
Hello Owen, thank you for your inquiry. Hook and loop 300527002 is not compatible with your model RS112. I apologize but the correct hook and loop had been discontinued.
Do screws come with this part or can I order screws? My current sander screws came out and the holes have "warbled" on the disc and loop assembly so the two screws I have left keep falling out. Is there a part # for the screws too if not included? I need the assembly and screws. Thank you!
Susie for model number RS290
Hello and thank you for writing. It does not come with the screws. The screws are part number # 660011003. We hope this helps. Please contact us anytime if you require further assistance.
Does the screws come with the pad? What about the round disk the screws anchor into??
Arnold for model number RS240 (Ryobi)
Hello and thank you for writing. No, the screws are not included with this assembly however, the disk is. the screw is # 606124007. We hope this helps. Please contact us anytime if you require further assistance.
300527003 is this the correct part ??
Wayne for model number R2601 Ridgid 8 hole pad
Hi Wayne, Thank you for your question. Yes, this would be the correct part for your sander. We hope this helps. Thank you and have a great day.
I know this is and old sander but need replacement hook and loop pad. In getting the old pad off I stripped one of the screws. I've got it out but it's toast. Anyway I could order the pad and get and extra screw for it? And is this the rt replacement, it seems to have the same hole set up. Thanks
Linda for model number R-S112 random orbital sander
Hello Linda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 971790005 for the Pad and Part Number: 998586002 for the screw. I looked up the parts and they are listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
I'm trying to determine the exact replacement "pad" for the sander. The description online says it is a 5" pad but mine is actually 4 3/8" in diameter. Help?
Kenny for model number Ryobi RS-115 Orbital Sander
Hello Kenny, thank you for your inquiry. The hook and loop sanding pad for your model RS-115 has been discontinued. We apologize for the inconvenience.
Repair Instructions: Submitted by Customers Like You
31 of 34 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Screw #10-32X1/4" - 660011003
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, N/A
Bad sanding loop assembly.
Removed 4 screws holding on the old pad. Blew out the saw dust from inside of the sander. Installed the new pad and screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
15 of 18 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Pad worn
The pad would no longer hold the sand paper..4 screws attached the pad to the sander, ..simply removed, pulled the bad pad off, attached the new one..took all of 2 min..sander back in action
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 8 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sanding pad tore apart.
1 Took the screws out
2 Pad off
3 Pad on
4 Screws back in
5 Using sander

Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Pad wore out
Removed the 4 screws holding the pad to the base. Placed new pad on the base, lined up the screws holes, then attached the pad to the base with the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Disc needed replacing
Unscrewed and removed broken disc
Placed with new disc and replaced screws

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Pad for holding hook and loop sand paper on sander ripped and separated
Turned sander upside down.
Unscrewed (4) screws holding old pad base on.Kept these screws.Removed old base.
Placed new base on sander,aligned screw holes of new base pad with sander screw thread holes replaced the (4) screws.Finished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hook and loop disc assembly brok
1). Removed the four machine screws from the hook and loop disc assembly.
2). Removed the old hook and loop disc assembly.
3). Inserted one of the machine screws into the recessed holes of the hook and loop disc assembly and loosely tightened it.
4). Aligned the remaining holes and inserted the remaining three machine screws.
5). Cross tightened each of the screws until all four were factory tight.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Hook and loop disk split
Unscrewed torn disk and installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, None
Removed 4 small screws
Removed hook assembly
Set new assembly
Installed 4 screws
Finished
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Hook and Loop Disc Assembly - 300527002
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Normal wear and tear
Swapped out the part and good to go. Thanks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
55 Reviews
Click to filter by ratings:
5 stars
55
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Great part.
    Part fit and worked great. Arrived sooner than expected. My sander is back working fine.
    Guest - February 7, 2020 Verified Purchase
    Easy peasy!
    The part fit perfectly and was easy to install. I had to remove only 4 screws to take off the old assembly and reinstall the screws after the new part was dropped into place. Less than a five minute job.
    Guest - January 28, 2020 Verified Purchase
    Great part
    Perfect fit and easy to install.
    Guest - January 18, 2020 Verified Purchase
    Arrived Fast and easy to replace
    Arrived sooner than expected, replaced easily, and works great (sanding disc is now hard to pull off once more, sticks great). Very pleased with product and shipping and cost.
    Guest - January 13, 2020 Verified Purchase
    Very easy repair
    The part arrived quickly and fit perfectly, sander was up and running within 5 min.
    Guest - December 31, 2019 Verified Purchase
    Great service
    The part arrived quickly and fit perfect
    Guest - December 27, 2019 Verified Purchase
    Just what I needed. Fit perfectly.
    Fit perfectly. Just what I needed.
    Guest - December 7, 2019 Verified Purchase
    correct part,
    correct part, fit perfectly and came quickly. thanks
    Guest - November 25, 2019 Verified Purchase
    Easy repair, great part, worked as expected
    My sander originally had an adhesive pad which I replaced with a hook and loop many years ago. The original replacement failed - it was simply adhered to the old adhesive pad. This replacement was for the entire unit and works great.
    Guest - November 22, 2019 Verified Purchase
    Got perfect, delivery right on time, thanks
    The part was exactly what I ordered and fit perfectly thank you
    Guest - November 16, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Manufacturer: Ridgid, Ryobi
    Product Number: 300527002
    Classification: Part
    Weight: 0.08 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy