Gasket-Air Cleaner

Removed carburetor, disambled carb, cleaned all parts and reassembled carb

1. Clamp fuel line.
2. Remove air cleaner assembly.
3. Remove carburetor.
4. Replace with new carburetor.

Removed carburetor gas tank and gas pump. I drained all the old gas out of the tank and used a hanger and a rag and moped the tank. then i rebuilt the carburetor I first took it apart and soaked it then I sprayed all the jets out. then put carburetor together. then put carburetor back on put new gas hose,gas filter,and gas pump. I did not want to recontaminate the carburetor.

1. Removed carburetor
2. Disassembled carburetor
3. Soaked carburetor and parts in carburetor for 48 hours
4. Blew out carburetor with compressed air
5. Re-assembled carburetor with new gaskets
6. Re-installed carburetor on tractor
7. Tested repair. All good.

NOTE: I took photographs prior to and during disassembly which were invaluable in correctly re-installing carburetor. Also purchased service manual for engine.