Gasket-Nozzle 841649 - OEM Briggs and Stratton

Description:

It is a genuine manufacturer-approved replacement part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This gasket provides a tight seal for the nozzle, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time it may wear out and begin to crack eventually requiring a replacement. Keep in mind it is made of high-quality composite material and is sold individually.

Frequently Purchased With

Gasket-Float B..
$7.23

Seal-O Ring (F..
$7.70

Compatibility

This part is compatible with the following machines:

Toro

74590 (200000001-200999999)(2000) Lawn Tractor
74590 (210000001-210999999)(2001) Lawn Tractor
74590 (220000001-220999999)(2002) Lawn Tractor
74590 (230000001-230999999)(2003) Lawn Tractor
74590 (240000001-240999999)(2004) Lawn Tractor

74590 (250000001-250999999)(2005) Lawn Tractor
74812 (270000001-270999999)(2007) Lawn Tractor
74812 (280000001-280999999)(2008) Lawn Tractor
74814 (270000001-270999999)(2007) Lawn Tractor
13AT61RH048 (1L137H10100) LX466 Lawn Tractor

Briggs and Stratton

Expand the 150+ compatible machines

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Gasket-Float Bowl - 690994

Gasket-Nozzle - 841649

Seal-O Ring (Solenoid Retainer) - 841653

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver

engine would not run correctly when warmed up.

Remove engine shroud.
Clean gunk from area.
Removed carb intake bolts and rubber hoses.
Pull carb forward and disconnect governor linkage.
Tilt carb down.
Removed bowl from carb, replaced parts and reassembled.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Oil Filter - 492932B

Gasket-Intake - 690950

Tube-Fuel Transfer - 699729

Gasket-Float Bowl - 690994

Kit-Choke Shaft - 796228

Gasket-Nozzle - 841649

Gasket-Air Cleaner - 691001

Gasket-Carburetor Plate - 690234

Seal-O Ring (Fuel Transfer Tube) - 690988

Seal-O Ring (Solenoid Retainer) - 841653

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Nutdriver

Had water in the carburetor

Removed carburetor gas tank and gas pump. I drained all the old gas out of the tank and used a hanger and a rag and moped the tank. then i rebuilt the carburetor I first took it apart and soaked it then I sprayed all the jets out. then put carburetor together. then put carburetor back on put new gas hose,gas filter,and gas pump. I did not want to recontaminate the carburetor.

Did you find this story helpful?

Thanks for voting and helping fellow customers!