Medium
1-2 hours
It is an authentic part that is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this gasket is to provide a tight seal for the intake manifold, unfortunately, over time the material will wear out and may begin to fail eventually requiring a replacement to maintain top performance. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable composite material and is sold individually.
Gasket-intake 690949
OEM part for: Briggs and Stratton, Toro
Part Number: 690949
$3.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-intake will fit the following 5448 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Tractor Parts
This part replaces obsolete part #: 273487
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fixed the problem.
Now on to other repairs.
Gordon -
May 18, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-intake
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Nikki carburetor repair
arthur - August 13, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver, Nut driver
Soaked carburetor cleaner overnight, replaced all parts mentioned and reinstalled carb. And ran great and eReplacement parts made all possible by the good selection of parts and the one day shipping made fast repair possible, Thanks, Arthur Petty
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine surging
Gordon - May 20, 2022
Tool Type
Lawn Mower
Difficulty
Easy
Time
1-2 hours
Tools Used
Socket set, Wrench Set, Nutdriver
Parts Used
Replaced o-rings on two carburetor jets. Also replaced intake manifold gaskets.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Using oil
Tommy - April 14, 2020
Tool Type
Lawn Tractor
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Cylinder hone
Rebuild the engine by replacing the rings
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Valve guides were depressed into the head.
Dan - March 7, 2018
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Power Drill, Socket set, Wrench Set, Valve spring compressor
1. Pressed guides back to correct position.
2. Staked the guides with pointed punch, into the brass insert around the guide.
3. Reassembled the engine. Did both sides of the twin cylinders.
4. Started up, ran perfect.
2. Staked the guides with pointed punch, into the brass insert around the guide.
3. Reassembled the engine. Did both sides of the twin cylinders.
4. Started up, ran perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Misfiring on one cylinder
Sterling - September 20, 2017
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Nutdriver, Allen wrench, inch LB torque wrench , torque specs l
Ran compression test and found one cylinder has no compression
Removed the head and found the exhaust valve stuck open removed the valve cleaned it put it back in the head
Cleaned all the gasket surfaces
Reinstalled head
Looked up torque specs online
Torqued to specs
Put everything else together and mowed the lawn!
Removed the head and found the exhaust valve stuck open removed the valve cleaned it put it back in the head
Cleaned all the gasket surfaces
Reinstalled head
Looked up torque specs online
Torqued to specs
Put everything else together and mowed the lawn!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bent push-rod.
Norman - June 17, 2017
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
1. Removed the head.
2. Checked for damage, found a sticky valve and a bent push-rod.
3. Replaced the valve parts and the push-rod. Runs fine now.
2. Checked for damage, found a sticky valve and a bent push-rod.
3. Replaced the valve parts and the push-rod. Runs fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Briggs V-Twin running on 1 cylinder, will not turn over due to high compression.
Russ - March 21, 2016
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Check rocker arm movement to determine cam condition.
Replace worn out cam (one lobe gone).
Good time to change the seal at this time too.
Carefully adjust the valves "by the book".
Check / clean carburetor very carefully. The idle jets are very small and clogs aren't easily seen.
(took 2 attempts)
Turns over freely now and runs like a top.
Thanks !
Replace worn out cam (one lobe gone).
Good time to change the seal at this time too.
Carefully adjust the valves "by the book".
Check / clean carburetor very carefully. The idle jets are very small and clogs aren't easily seen.
(took 2 attempts)
Turns over freely now and runs like a top.
Thanks !
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
