Grid squares measure 1x1 inch

Watch The
Repair Video

Crankcase Gasket

Part Number: 10024242030

Order within the next 10 hours

and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

This is an authentic replacement part manufactured for use with outdoor power equipment. The crankcase gasket is used to seal the two halves of the crankcase. It is recommended to replace gaskets when servicing the engine to ensure proper seals when reassembling the engine. This crankcase gasket is available as an individual replacement part.

Warning: California's Proposition 65

Frequently Purchased With

Oil Seal
$5.88

Compatibility

This part is compatible with the following machines:

Shindaiwa

DH212 (S78311001001 - S78311999999) Hedge Trimmer
DH212 (S78311001001 - S78311999999) Hedge Trimmer

EB212 (P02411001001-P02411999999) Power Blower
SV212 (P02611001001-P02611999999) Shredder Vac Blower

Echo

Expand the 150+ compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Trimmer

Parts Used:

Cylinder Gasket - V100000160

Crankcase Gasket - 10024242030

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Nutdriver, allen wrench

leaking oil

1 removed piston head
2 separated crankshaft housing
3 replaced both oil seals
4 re assembled unit with new gaskets. and new piston ring
5 finished assembly of unit
6 started second pull.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Oil Seal - 10021242031

Crankcase Gasket - 10024242030

Gasket-Cylinder - V100000190

Woodruff Key - 10014212330

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Nutdriver, Torch 27 and 25. A piece of starter rope and razor blade

Crank seal leaking

Replaced crank seals, cylinder gasket and crankcase gaskets

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Cylinder Gasket - V100000160

Oil Seal - 10021242031

Crankcase Gasket - 10024242030

Fuel Grommet - 13211546730

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Wrench Set, Nutdriver, allen wrenches

Echo SRM trimmer wouldnt start

I recently completed a small engine repair course. My trimmer wouldn't start but had good spark and compression. It'd start briefly using starter fluid but wouldn't star running. Using my new knowledge I took my non running Echo SRM-210 completely apart, separated the block and replaced all of the seals and gaskets on the trimmer. I also cleaned the unit completely and put new fuel lines and grommet and a new carb. Total time from start to finish was just about 2 hours. For less than $100 worth of parts I have a trimmer that runs as new, vs replacing it with a $200-250 new unit. I'm pretty handy but before the OPE course I wouldn't have even attempted this repair, now I have full confidence and cant wait for the next project.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Repair Guides

Watch the Repair Video for Crankcase Gasket

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015