Easy
15-30 minutes
This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.
Clip 13201309820
OEM part for: Echo, Shindaiwa, Little Wonder
Part Number: 13201309820
$5.19
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Also Known As: Fastener, Retainer, Clasp
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Clip will fit the following 894 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Shindaiwa
Echo
Little Wonder
Show More Compatible ModelsThis item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
- Chain Saw Parts
- Saw Parts
- Blower Parts
- Edger Parts
- Grass Trimmer Parts
- Drill Parts
- Cultivator Parts
- Pruner Parts
- Reciprocating Saw Parts
- Pump Parts
- Vacuum Parts
Repair Videos ?
Watch the Repair Video for
Clip
Articles:
|
Replace the metal fuel line clips on your Echo SRM-225 trimmer. Simple instructions show you how....
May 22, 2015
|
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
👍
👍
Guest -
August 20, 2019
Verified Purchase
Parts Available
I was lucky to find the web site, the one location to find all the parts you need and a great pictorial on locating the exact parts. Pricing was very competitive and shipment quick. Once received each part was in it's own bag clearly identified. Will definitely be ordering from eReplacement Parts again.
Guest -
August 8, 2019
Verified Purchase
Great part and much needed in the repair
Packaged nicely as to not get lost as it is a very small part
Guest -
July 16, 2019
Verified Purchase
easy repair
Parts arrived quickly and worked perfect. I just wish the operator told me it was going to cost more to ship immediately because I did not need it fast and should have paid reg. not express!
Guest -
March 7, 2020
Verified Purchase
Screw replacement
I have used your site for many years.
I recently ordered 2 black ordinary 5mm x 25 pan head screws. I broke down and paid $3.99 each plus a crazy shipping price. And if you need it like in 2 days it could be $10-12 shipping.
I ordered it. It was like $13.
I needed a few more. I went to my local Hardware. I got the same screws, and went crazy and got stainless steel. The screws were .69 cents each, no shipping, about 45 minutes round trip, about .75 for gas. I understand the corona virus could slow shipping, but your shipping was always expensive and pretty slow. About 1 1/2 weeks to get some screws.
With so much competition out there. Most of the time I get it in 2-3 days. And if you get Prime no shipping or tax. A lot of times for inexpensive items maybe $10 or less you can find it elsewhere for $4 less. That is a lot!!
Guest -
April 30, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Clip
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fuel filter tube broken off in fuel tank , dirty air and fuel filters, cracked primer bulb
Martha - April 18, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Replace primer bulb by removing metal plate screws and replacing old bulb. Remove and replace old air filter in same manner. Remove grommet containing fuel lines from opening in fuel tank. Attach new fuel filter to new fuel line and push through opening in new grommet from underside. Install new grommet in tank opening and then push remaining tubes in proper holes. It is important to wait to install the remaining tubes after the new grommet is in place in order to have enough flexibility to squeeze the grommet to fit the opening in the tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rotted parts do to age.
Wayne - July 13, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Removed air cleaner.
Removed old plug and lines.
Reinstall new parts.
Removed old plug and lines.
Reinstall new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Vent tube failure on my trimmer
Terry - June 21, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pair of cutters to angle lines for grommet
Watched your instruction videos on repair process
Removed old lines and filters.
Changed the grommet
Installed new lines and filters
Removed old lines and filters.
Changed the grommet
Installed new lines and filters
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Idled ok but no power.
Arden - April 27, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Fingers and thumbs
Parts Used
- Fuel Grommet - 13211546730
- Fuel Filter - A369000480
- Clip - 13201309820
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Line - V471001211
- Tube Connector - 13201103360
- Pipe - 13201212362
- Fuel Return Tube - 13201056330
- Vent Cover - 13132840630
- Fuel Line - V471001191
- Vent Assy. - 13130056431
Removed and replaced all tubes, grommets, filters, etc., and primer bulb. Grommet was leaking for sure, bulb seems to also have had a small leak.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel tank cracked, filter disolved
Charles - April 11, 2018
Tool Type
Cultivator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
As noted by others, grommet does not fit the new tank. It is too small for the hole.
You need to find a larger grommet that does fit, or use a rubber cork with a hole in it.
1. Remove three screws holding tank to engine
2. Remove fuel hose from carburetor
3. Remove fuel cap and save. Discard old tank (with hose and filter inside)
4. Slide clip over hose about 1/4 inch from one end
5. Insert filter into end of hose
6 Slide clip over the hose where filter is inserted
7. Slide grommet over the over end of the hose. Be sure that orientation is correct (small end towards filter. Position grommet approximately 2 inches from end of hose.
8. Insert filter end of hose into the new tank
9. Do NOT insert grommet at this time.
10. Attach tank to engine with the three screws.
11. Attach end of hoe to carburetor
12 Hold grommet against the hole in tank. Make sure that the hose is not stretched or kinked. Adjust the length of the hose until there are 2 smooth curves in it.
13 Insert grommet into the tank. Ensure that is seats completely.
14 Fill tank part way with clean fuel and tilt the engine until the grommet is covered by the fuel. Check for leaks around grommet and carburetor connection.
You need to find a larger grommet that does fit, or use a rubber cork with a hole in it.
1. Remove three screws holding tank to engine
2. Remove fuel hose from carburetor
3. Remove fuel cap and save. Discard old tank (with hose and filter inside)
4. Slide clip over hose about 1/4 inch from one end
5. Insert filter into end of hose
6 Slide clip over the hose where filter is inserted
7. Slide grommet over the over end of the hose. Be sure that orientation is correct (small end towards filter. Position grommet approximately 2 inches from end of hose.
8. Insert filter end of hose into the new tank
9. Do NOT insert grommet at this time.
10. Attach tank to engine with the three screws.
11. Attach end of hoe to carburetor
12 Hold grommet against the hole in tank. Make sure that the hose is not stretched or kinked. Adjust the length of the hose until there are 2 smooth curves in it.
13 Insert grommet into the tank. Ensure that is seats completely.
14 Fill tank part way with clean fuel and tilt the engine until the grommet is covered by the fuel. Check for leaks around grommet and carburetor connection.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed a general tune up and fuel was leaking from old lines and a small crack on top of tank
Clint - March 27, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill
Contacted small engine repair person that I normally use and got price on what repairs would cost. Then decided to do it myself. Found most of what I needed on the eReplacementParts.com website. A short phone call cleared up a couple of issues that I wasn't sure on. Parts (including a fuel tank that was ordered separately) arrived in about 3-4 days. All parts were genuine Echo OEM parts, which was important to me.
Used cordless drill with torx attachment, a screwdriver and needle nose pliers to remove fuel tank, old primer bulb and fuel lines pulled off easily with fingers. While everything was apart, used Chemtool spray carb cleaner to good old red shop rag to clean up seven years worth of grime.
Reassembly with new parts was easy and quick. The only thing I would recommend if you think you might not remember.....take a pic of how the fuel pipe, fuel tank vent and vent tube are setup....just so you know you've got the right one in the right place. Very easy though.
My seven year old Echo looks almost new and runs like a top with the tune up and replacement parts. Will for sure order from these guys again.
Used cordless drill with torx attachment, a screwdriver and needle nose pliers to remove fuel tank, old primer bulb and fuel lines pulled off easily with fingers. While everything was apart, used Chemtool spray carb cleaner to good old red shop rag to clean up seven years worth of grime.
Reassembly with new parts was easy and quick. The only thing I would recommend if you think you might not remember.....take a pic of how the fuel pipe, fuel tank vent and vent tube are setup....just so you know you've got the right one in the right place. Very easy though.
My seven year old Echo looks almost new and runs like a top with the tune up and replacement parts. Will for sure order from these guys again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking fuel / maintenance
Reid - March 20, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed old fuel lines,, replaced the same way they came off. Grommet was the only part that was a little difficult to get in the tank, put some grease on it and get one side started and roll it in with a screw driver tip.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
General maintenance.
Ralph - October 25, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed the bad filter, the tubing, and the primer bulb. Reinstalled the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel leaks
arthur - October 19, 2017
Tool Type
Pruner
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Scissors
replaced fuel filter, fuel line, fuel tank grommets, fuel tank vent and clip. Time required was to fix two machines. Very simple repair if you follow the directions
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Need replacement parts and a tune up.
DON - October 10, 2017
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
1. Replaced the fuel line and the fuel filter.
2. Replaced the spark plug.
3. Replaced the air filter.
4. Adjusted the power and the idle screws.
2. Replaced the spark plug.
3. Replaced the air filter.
4. Adjusted the power and the idle screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
