Medium
15-30 minutes
This replacement carburetor is an authentic OEM sourced item, not an aftermarket imitation. It is specially designed for use on Husqvarna and Poulan chainsaws. The purpose of a carburetor is to mix the air and gas before the fuel mix goes to the engine. This assembly includes a metal body carburetor and a plastic heat dam. When replacing carburetor it is advised that you also replace carburetor gaskets to ensure air tight seal. You will need a screwdriver to perform this repair.
Carburetor-w-29 530071987
OEM part for: Husqvarna, Poulan
Part Number: 530071987
$46.07
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 40 machines
Poulan
2750 Gas Chain Saw View Diagrams & Manuals
3050 Gas Chain Saw View Diagrams & Manuals
PP255 Gas Chainsaw View Diagrams & Manuals
2600 Chainsaw Gas Chain Saw View Diagrams & Manuals
PP310 Gas Chainsaw View Diagrams & Manuals
PP315 Gas Chainsaw View Diagrams & Manuals
Husqvarna
41 (1991-06) Chainsaw View Diagrams & Manuals
41 (1994-05) Chainsaw View Diagrams & Manuals
36 (1991-06) Chainsaw View Diagrams & Manuals
36 (1994-05) Chainsaw View Diagrams & Manuals
136 (1998-09) Chainsaw View Diagrams & Manuals
136 (2001-05) Chainsaw View Diagrams & Manuals
136 (2001-09) Chainsaw View Diagrams & Manuals
136 (2003-01) Chainsaw View Diagrams & Manuals
136 (2003-06) Chainsaw View Diagrams & Manuals
136 (2004-01) Chainsaw View Diagrams & Manuals
136 LE (2001-06) Chainsaw View Diagrams & Manuals
137 (2005-03) Chainsaw View Diagrams & Manuals
137 (2005-09) Chainsaw View Diagrams & Manuals
137 (2006-01) Chainsaw View Diagrams & Manuals
137 (2006-12) Chainsaw View Diagrams & Manuals
137 E (2005-03) Chainsaw View Diagrams & Manuals
137 E (2005-09) Chainsaw View Diagrams & Manuals
137 E (2006-01) Chainsaw View Diagrams & Manuals
137 E (2006-12) Chainsaw View Diagrams & Manuals
141 (1998-09) Chainsaw View Diagrams & Manuals
141 (2001-05) Chainsaw View Diagrams & Manuals
141 (2001-09) Chainsaw View Diagrams & Manuals
141 (2003-01) Chainsaw View Diagrams & Manuals
141 (2003-06) Chainsaw View Diagrams & Manuals
141 (2004-01) Chainsaw View Diagrams & Manuals
141 LE (2004-05) Chainsaw View Diagrams & Manuals
142 (2005-03) Chainsaw View Diagrams & Manuals
142 (2005-09) Chainsaw View Diagrams & Manuals
142 (2006-01) Chainsaw View Diagrams & Manuals
142 (2006-12) Chainsaw View Diagrams & Manuals
142 E (2005-03) Chainsaw View Diagrams & Manuals
142 E (2005-09) Chainsaw View Diagrams & Manuals
142 E (2006-01) Chainsaw View Diagrams & Manuals
142 E (2006-12) Chainsaw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 530035412, 530035330, 530071510, 530071692, 530035482, 530035291
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy Repair
Unpacked, removed old one and slipped this one in. Started right away just needed the idle speed adjusted slightly but ran great
Frank -
23 days ago
Verified Purchase
chain saw carburetor
recieved carb within a few days was correct part installed run great thank you
Guest -
April 27, 2019
Verified Purchase
Good price easy to install
Shipping was fast etc than expected
Guest -
January 29, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor-w-29
Where do I find this model number is it above the serial number
Joe
asked on 2022-04-14
Hello Joe, Thank you for the question. The Model and Serial number should be on the same sticker or tag on the outside of the Engine. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 14, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Needed new carburetor.
John - June 29, 2016
👍 12 of 13 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, All needed
Parts Used
Remove the air cleaner from the saw. Remove the fuel line. Remove the screws that secure the carburetor to the saw. Remove the old carburetor. Install the new carburetor. Tighten the screws. Install the fuel line, then the air cleaner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chainsaw fuel line, carb, air filter and spark plug
michel - September 4, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Curved Forceps plier
Parts were all correct. The only challenge was the fuel line because of the design of my Husqvarna chain saw. You have to trade the fuel line from the inside of the gas tank. A u-tube search helped a lot. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My chainsaw wouldn't idle and wouldn't throttle up to operating speed.
John - October 16, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
I replaced the fuel line and the fuel filter but that had no effect. I ordered the carburetor from you and after putting it on, it started and ran well. The carburetor was adjusted at the factory so no adjustments were necessary. Job done, runs well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chainsaw would fire but would not stay running
Tim - November 7, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed top cover of chainsaw 3 screws
Removed air filter 2 screws
Removed carburetor 2 screws
Removed gas line, throttle linkage, and choke linkage
Reassembled gas line throttle linkage and choke linkage on new carburetor
Put new gasket on engine
Put carb in place
Put 2 screws for carb into block
Put new air filter in place and put 2 screws in
Put cover on 3 screws
Started saw and runs great!
Got an estimate for 239$ to do repair, did it myself for 41$ and 25 min of my time
Removed air filter 2 screws
Removed carburetor 2 screws
Removed gas line, throttle linkage, and choke linkage
Reassembled gas line throttle linkage and choke linkage on new carburetor
Put new gasket on engine
Put carb in place
Put 2 screws for carb into block
Put new air filter in place and put 2 screws in
Put cover on 3 screws
Started saw and runs great!
Got an estimate for 239$ to do repair, did it myself for 41$ and 25 min of my time
Did you find this story helpful?
Thanks for voting and helping fellow customers!
would not idle, lack of power
Franklin - August 23, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Removed top cover, air filter, fuel line, replaced carburetor. replaced in reverse order. Saw started and ran great. Had to adjust idle. Paid two different repair guys to fix this saw $150.00 total. I replaced carb for less than $40.00. problem solved. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
husky chain saw would not start
Douglas - May 27, 2020
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
After checking a few things i noticed the carb was not sucking gas through the line . Pulled the plug and put a small amount of gas in and on the plug . It fired right up but only ran a few seconds. Problem solved. Ordered a new carb and gasket. Had a walboro but the zama carb runs like new. Every thing lined up with no problem. Started after about 6 pulls but only takes 2 or 3 now when cold. If hot starts up first pull. Easy fix and runs like new. No special tools needed except one to adjust carb if needed but it comes preset .Thank you E replacement parts .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor was dirty and I couldn't get it clean
Eric - March 11, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Took the old carb off, put the new one on, hooked everything up, 2nd pull and the chainsaw started and runs great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed new carburetor.
John - June 29, 2016
👍 12 of 13 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, All needed
Parts Used
Remove the air cleaner from the saw. Remove the fuel line. Remove the screws that secure the carburetor to the saw. Remove the old carburetor. Install the new carburetor. Tighten the screws. Install the fuel line, then the air cleaner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
