866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  DeWALT Parts  145323-06 Carbon Brush

Carbon Brush

Part Number: 145323-06
DeWALTBlack and Decker

We Sell Only Genuine Parts From the Manufacturer – Guaranteed!

Availability: 25+ in stock
Price: $7.07
Quantity:
Order within the next 4 hours
and your part ships today!

*This part replaces obsolete part #: 145323-03 and 145323-02.

Specifications
  • Dimensions
  • Length 3/4 Inch
  • Width 1/2 Inch
  • Thickness 1/4 Inch Sold Individually
Description:
This is a genuine manufacturer-supplied replacement which is specially designed for use with DeWALT and Black and Decker saws. The purpose of a brush is to conduct the current in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind this high-quality brush is sold individually When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch?
Product Information
Manufacturer: DeWALT, Black and Decker
Product Number: 145323-06
Classification: Part
Weight: 0.01 lbs.
Also Known As: Motor Brush
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Motor Brushes on a DeWALT Circular Saw
Step-by-step instructions for removing and installing the motor brushes on your DeWALT circular saw....
June 13, 2018
Compatibility

This part is compatible with the following machines:

DeWALT
DW705-220 Type 1 12 inch Miter Saw
DW705-220 Type 1 12 inch Miter Saw
DW705-220 Type 2 12 inch Miter Saw
DW705-220 Type 2 12 inch Miter Saw
DW705S Type 5 12 inch Compound Miter Saw
DW705S Type 5 12 inch Compound Miter Saw
DW705S Type 6 12 Inch Compound Miter Saw
DW705S Type 6 12 Inch Compound Miter Saw
DW705S Type 7 12 inch Compound Miter Saw
DW705S Type 7 12 inch Compound Miter Saw
DW705S Type 8 12 inch Compound Miter Saw
DW705S Type 8 12 inch Compound Miter Saw
DW705 Type 2 12 Inch Miter Saw
DW705 Type 2 12 Inch Miter Saw
DW705 Type 3 12 Inch Miter Saw
DW705 Type 3 12 Inch Miter Saw
DW705 Type 4 12 Inch Miter Saw
DW705 Type 4 12 Inch Miter Saw
DW705 Type 4A 12 Inch Miter Saw
DW705 Type 4A 12 Inch Miter Saw
DW705 Type 5 12 Inch Miter Saw
DW705 Type 5 12 Inch Miter Saw
DW705 Type 6 12 Inch Miter Saw
DW705 Type 6 12 Inch Miter Saw
DW705 Type 7 12 Inch Miter Saw
DW705 Type 7 12 Inch Miter Saw
DW705 Type 8 12 Inch Miter Saw
DW705 Type 8 12 Inch Miter Saw
DW708 Type 1 Crosscut Miter Saw
DW708 Type 1 Crosscut Miter Saw
DW708 Type 3 Crosscut Miter Saw
DW708 Type 3 Crosscut Miter Saw
DW744S Type 2 Jobsite Table Saw
DW744S Type 2 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW361 Type 1 Circular Saw
DW361 Type 1 Circular Saw
DW361 Type 2 Circular Saw
DW361 Type 2 Circular Saw
DW357 Type 1 Circular Saw
DW357 Type 1 Circular Saw
Black and Decker

Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Miter Saw
  • • Saw
  • • Table Saw
Questions & Answers

How many brushes does this take? It looks like 2 by the diagram. Thanks
Paul for model number dewalt dw705 type 1
Hello Paul, Thank you for the question. You will need to order two brushes. Good luck with this repair!
Repair Instructions: Submitted by Customers Like You
8 of 9 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Replace brushes
Remove brush caps with a screwdriver, then remove the old brushes. Install the new brushes, then replace the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Blade brake sluggish
Simply remove brush covers with a screw driver remove old brush assemblies blow out all dust, install new brushes and secure by reinstalling brush covers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn brushes.
Replaced the old brushes with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 6 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw had failed to start and the best solution for this problem was to replace the old brushes.
I was able to purchase the replacement brushes and springs at ereplacementparts.com and I was pleased with the ease of installation and moreover by the exceptional follow-up and delivery time!! All you have to do is remove the brush caps, remove the old brushes and install the new brushes , then screw the brush caps back on.

Kudos to you all and I have already sent you several customers!!! Now the saw is like new and I am back in business thanks to the parts and speed of delivery!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Motor quit due to worn brushes
Removed the brush caps, removed the old brushes, installed the new brushes, replaced the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes wore out after 18 years
Removed brush caps. Removed old brushes. Installed new brushes. Installed brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Brush Cap - 448084-01
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Circular saw ran yet but weak, lot of sparks coming from where the 2 brushes met the armature. New brushes much more power n less sparks now.
Took the two brush caps off, that someone had tried to, or had taken off before with a screw driver that was to narrow. Got the caps off, replaced the brushes I bought easily n cheaply on e replacement parts.com. put the new caps on. The saw looks n runs much better than it did.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
My DeWalt 744 table saw could barely rip a piece of pine after years of great service. I suspected brushes but was not sure.
Watched a You tube video on carbon brush replacement. Followed instructions and used eReplacement Parts to effect repair. Saw working great again. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Smoke coming from armature of table saw
1. Unscrewed carbon brush cap from armature cover.
2. Removed old carbon brushes.
3. Inserted new carbon brushes.
4. Screwed the caps back onto the armature cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush - 145323-06
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sparks
Unscrewed cap, pulled out brush, pushed in brush, screwed on caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Carbon Brush - ( 145323-06 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Brush Compatability

alanalford

Are the brushes for a DW 704 (Type 4A) mitre saw interchangeable with the brushes for a DW 705 (Type 4A) mitre saw?
Hi alanaford,
Yes they will work.Hope that helps.
Tinker
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy