Carbon Brush Assembly 22-18-0680 - OEM Milwaukee - eReplacementParts.com
eReplacementParts.com
877-346-4814
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-18-0680 Carbon Brush Assembly

Carbon Brush Assembly 22-18-0680

OEM part for: Milwaukee

Part Number: 22-18-0680


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Ships within 1 business day
Easy Less than 15 minutes (14 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this fit my product?

Product Description ?

Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead, brush spring and bracket attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Assembly
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Carbon Brush Assembly will fit the following 89 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Milwaukee

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts
  • Drill Parts
  • Drill Press Parts
  • Polisher Parts
  • Electric Drill Parts
  • Sander Parts

This part replaces obsolete part #: 22-18-0620

Customer Part Reviews ?

5
Average Rating (out of 5):
9 Reviews
Click to filter by ratings:
5 stars
9
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fast delivery and quality parts
    This particular carbon brush assembly was on back order at the time I placed my order. It arrived quicker than the estimated arrival day. The quality of the carbon brushes are like the originals.
    Andrew - September 16, 2021 Verified Purchase
    Good parts, fit perfect.
    After cutting the commutator and installing new brushes we have a new machine.
    Guest - October 31, 2020 Verified Purchase
    very quick shipment
    I received brusshes for my motor
    Guest - April 8, 2020 Verified Purchase
    Great service, thank you
    Part worked well and kept me from having to buy a new portable band saw.
    Guest - March 12, 2020 Verified Purchase
    Fit right in
    All components assembled easily and the price was good including delivery.
    Guest - September 19, 2019 Verified Purchase
    Carbon Brush ASSY.
    Work just great had no problem installing.
    Guest - June 12, 2019 Verified Purchase
    Awesome!!
    Found the parts I needed easily from your website. Ordered on a Thursday and parts arrived on the following Monday — several days earlier than expected. The shopping was easy, price was very reasonable and the delivery was super fast!! Thank you for an awesome online shopping experience!!
    Guest - May 31, 2019 Verified Purchase
    Factory fit and finish, dropped in and worked flawlessly.
    The replacement Carbon Brushes fixed my problematic drill. Now it spins with PLENTY of power and no funny noises or smells. Nothing beats installing THE RIGHT PART(S). Don't be a cheap skate and take care of your tools and they will take care of you.
    Guest - May 13, 2019 Verified Purchase
    Iam a tecnichian and i like to bay parts with you
    I repair many brands and sometimes when i put an order and some parts are in back order is so much time waiting
    JOSE IGNACIO - April 20, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Assembly


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (14 rated repairs)?

    Excessive Sparks

    Chris - November 14, 2016
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1. Unscrewed the brush caps
    2. Removed the brushes-the brushes were burnt
    3. Visually inspected the commutator through the brush cavities
    4. Installed the new brushes and caps
    5. Retested
    6. Problem Solved
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes Arcing too much.

    ROY - September 26, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Removed Brush Retainer Caps.
    2. Removed worn Brushes.
    3. Installed new ReplacementParts Carbon Brushes.
    4. Ran Drill and Check operation.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Milwaukee die grinder quit working.

    Jeff - July 16, 2022
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, None

    Remove cover
    Remove old brush assembly
    Place new brush assembly into tool
    Replace cover
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brushes worn down to less than a quarter inch.

    Jesse - June 19, 2021
    Tool Type

    Polisher

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Took out the old ones, install new ones, tool ran great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Trigger got stuck

    Garrett - June 26, 2020
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Wire strippers

    Remove and clean screws from handle.
    Open handle and remove screws from the
    clamp holding the pigtail wire.
    Open replacement handle and follow instructions.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Electric drill brush replacement

    Michael - March 28, 2020
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, None

    Took off caps and replaced brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Wendell - October 20, 2019
    Tool Type

    Electric Drill

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers, Crimpers, wire strippers, small pick

    Follow instructions included with new switch kit. New handle and switch configuration to upgrade to new style.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn out Carbon Brushes, missing Brush Caps.

    maykel - May 14, 2019
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    In my case the brush caps were already missing so I didn't have to remove those but if your drill still have those then with a flat a screw driver simply unscrew it off, pull out old brushes, slide in the new ones followed by screwing on the brush caps and then you're all done.
    As an additional precaution you may want to check the black plastic where the caps screw on for missing chunks and pieces(black plastic part itself is not expensive but the labor to install it may be expensive and time consuming if you resort to having it done by someone else as the drill have to be split apart and then some), apparently a very common occurrence, especially on old used tools.
    Mine's were on fair-borderline bad-halfway missing. Thankfully there was enough threads showing on the black plastic part for the caps to grab on.
    Good luck on your repairs !
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    sparking and low preformance

    Dave - March 30, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    pull out old insert new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes damaged drill would not work

    Peter - February 21, 2018
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed caps
    Removed old brushes
    Slid new brushes in
    Screwed caps back on
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal