eReplacementParts.com
866-322-9842
Ryobi Parts

Bumper

Part Number: 98792
RyobiHomeliteRidgid
Availability: 25+ in stock
Price: $1.99
Quantity:
Order within the next 9 hours
and your part ships today!

*This part replaces obsolete part #: UP03501 and 570256001.

Product Information
Manufacturer: Ryobi, Homelite, Ridgid
Product Number: 98792
Classification: Part
Weight: 0.01 lbs.
Also Known As: Fuel Tank Grommet, Fuel Tank Bumper, Fuel Grommet, Rubber Grommet
Shipping: Ships Worldwide
Description:
This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.
Compatibility

This part is compatible with the following machines:

Ryobi
Homelite

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Grass Trimmer
  • • Pruner
  • • Trimmer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, torks sucket 1/4 drive
Broken fuel line at filter
Loosen 4 bolts,remove old tank. New clips and tank, tighten bolts, and connect fuel lines.
Under 5 minutes and running,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Torx
Gas tank leaking dried out cracked and loose
Remove the tank by removing the screws holding it and remove the fuel lines
Place the new bumpers on the new tank and install the new tank on the trimmer
Connect the fuel lines
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand
Trimmer gas tank bumpers missing or never installed at factory
Removed gas tank
installed bumpers
reinstalled gas tank
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Bumper - 570549001
Bumper - 98792
Muffler Gasket - 900994006
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, TORX DRIVER
GAS TANK LOOSE
PUT NEW BUMPERS ON
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Star head screwdriver
Gas leak
Removed old tank, fuel lines and bumpers. Installed the new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver
Carb dirty.
Removed the carb and replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Allen wrench
Motor would start, but died as powered up
Loosened the 4 hex head screws holding fuel tank cover in place.
Remove tank cover and pull fuel tank from mountings.
Remove bumpers and retain/replace as necessary
Remove fuel lines from motor(just pull them free of metal tubes)
Place bumpers in position on new fuel tank
Position new fuel tank, align bumpers, then re-attach tank cover with 4 hex screws.
Attach fuel lines
New fuel tank solved my issue!

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Gas tank vibrated off the trimmer, and the bumpers were lost.
1. Loosened the screws on the bracket that held the gas tank in place.
2. Put the bumpers in place.
3. Put the gas tank in place.
4. Tightened the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Bumper - 98792
Right Hand Thread Spool Retainer - 308042002
Timmer Head Spool With Line - 308044002
Fuel Tank Assembly - 308123004
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Torx driver
Fuel tank was leaking and spool was worn out.
Simply removed old parts and installed new ones. Only tool needed was torx driver for replacing fuel tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Tank Assembly - 308181004
Bumper - 98792
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Torx head screwdriver
Fuel line with filter attached inside tank broke.
1. Removed old tank (4 torx headed screws) and two lines from carburetor
2. Installed new tank using 3 bumpers, 4 screws and attached two lines to carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Perfect fit after all these years.
    Received parts in new condition. Last time my blower had new bumper SC was in the early 90s when I bought it!
    Guest - 8 days ago Verified Purchase
    Needed part.
    Part was missing easy to install.
    Guest - 14 days ago Verified Purchase
    Replacement part for fuel tank
    I needed 3 of these along with a new fuel tank for my trimmer. All the parts fit exactly, even on my older model trimmer. I’ll come back to this site if I need more parts in the future. Good transaction all around.
    Wayne - August 21, 2019 Verified Purchase
    Easy to find
    This was a recommended item to the item I was looking for. Thank you.
    Guest - July 29, 2019 Verified Purchase
    Great fit! Super price
    Back in service, great supplier to do business with
    David - June 15, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Ryobi, Homelite, Ridgid
    Product Number: 98792
    Classification: Part
    Weight: 0.01 lbs.
    Also Known As: Fuel Tank Grommet, Fuel Tank Bumper, Fuel Grommet, Rubber Grommet
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy