This is an authentic OEM part, sold individually. This is a replacement blade used with the compatible mowers listed below. It is responsible for cutting the blades of grass. A wrench is needed to remove and replace the blade bolt (532193003). This blade is used on mower that have a two blade deck, which provides a 46-inch cut.
Blade 532405380
OEM part for: Husqvarna, Homelite
Part Number: 532405380
Jump To:
Product Description ?
- Dimensions
- Length: 22-1/2 Inches
- Width: 2-3/4 Inches
- Classification: Part
- Weight: 2.35 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Blade will fit the following 269 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Husqvarna
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 594892801 (For Bagging or Discharging), 594892801, 7774053-80, 777405380, 405380
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Blade
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blades were badly worn and had some splits on the ends. Some vibration noticed.
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Breaker bar &Torque wrench.
Parts Used
Worn cable / worn blades
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Flash light
The mower blades were worn and needed to be replaced
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Pry bar
Parts Used
2. Using pry bar to keep one blade from turning, removed the retaining nut.
3. Removed old blade and replaced with new (make sure the correct side is up).
4. Using pry bar to keep blade from turning, tightened the retaining nut.
5. Repeat steps 2 through 4 for other side/ blade.
6. Remove tractor from jack stands.
This was a postive experience. All parts ordered ordered are functioning very well!!
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
the lawn mower deck. I followed up with recycling the many leaves that have dropped to the grass. All parts installed are working great!! Big thank-you for being there when I needed these new parts to have a successful mowing experience. Note: The parts I ordered are of great quality. The entire experience of this process has been sincerely appreciated!!
Gary S.
Blade worn out
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Parts Used
Blade pulley spindle broke
Tool Type
Lawn Tractor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Pneumatic tools
Mandrell assembly was broken.
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Adjustable Wrench
Drive belt needed to be replaced and new blades installed
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Adjustable Wrench
Parts Used
The blades were damaged and could not be sharpened properly. The head light was super easy to repair.
Tool Type
Lawn Tractor
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Grinder to properly sharpen the blades to the point I like.
2. Ran tractor up on a ramp so I could access the blades.
3. Removed old blades.
4. Took new blades whose edges were very rough to my woodworking shop and reground them to a chisel sharpness via 4 levels of sharpener stones.
5. rechecked the balance of each blade making a few small adjustments.
6. installed the blades in the lawn tractor and mowed my acre & a half lawn and it looked great.
My only question is why mower blades are shipped with such wrough edging. I am not a professional blow & mower but I have a very large yard and a sharp blade is needed for quality work.
needed blades
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.