Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck.
You may need pliers to complete this repair.
• First you want to see where the old cable is attached
• Just remove the cable end there and install the new one
• Now you can run the new cable up to the control handle
• Then just as the old cable, put the z-shaped end through the hole in the control handle
• Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Recieved part in short order
Part was the right one & fit right, mower working as it should. Thanks for the quick service.
Guest - April 29, 2019
Verified Purchase
★★★★★
★★★★★
fit great
Fast shipping just list the stock part
Guest - June 12, 2019
Verified Purchase
★★★★★
★★★★★
Repair Husqvarna rider
This is the second order to your company very pleased with availability of parts I needed, excellent price, shipping. and the right part thank you
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
Great part
The part I ordered was exactly what I needed for my repair. It was easy to look up and the checkout process was excellent. That’s why I use your company every time I need parts
Guest - August 22, 2019
Verified Purchase
★★★★★
★★★★★
Relatively Easy Repair, Wonder if new spring will last longer than the old one
Had to replace this on my mower that is only 4 months old. Still under warranty, but less hassle to just replace it myself than to haul it to a service center and wait. Not difficult to do, definitely need to remove the gas tank for easier access.
Guest - September 9, 2019
Verified Purchase
★★★★★
★★★★★
Very easy repair!
Fast shipping and easily installed!
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair, great part, very pleased
Part was package correctly in new condition
Guest - April 7, 2020
Verified Purchase
★★★★★
★★★★★
Quick service and the part fit perfectly!
The order was filled quickly and it fit perfectly!
Bobby - April 22, 2020
Verified Purchase
★★★★★
★★★★★
Good Part Bad Shippingg
This was the right part and my machine is fixed. However, since the tracking report is available, I know why the part took nine days to travel an hour away from where it was shipped to my house. Not your fault, but it went on a journey from Utah to Sacramento to San Francisco to Sacramento again and back to Utah to get to me.
Guest - August 24, 2020
Verified Purchase
★★★★★
★★★★★
Lawnmower repair
Worked perfectly
Guest - August 10, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
On a Husqvarna YTH22V46 lawn Tractor:
Removed tractor hood
Removed fuel tank and set on engine
Removed manual blade clutch engagement lever assembly from inside dash
Removed old cable from lever assembly
Detatched mower deck, slid out from under tractor and removed old cable
Attached new cable to mower
... Read moredeck and reversed previous steps up to re-installing fuel tank
NOTE: Replacement cable should easily attach to lever assembly. If you need to \"stretch\" the cable to install it is not the proper cable. (not an issue if you bought from eReplacmentParts.com) Important to test movement of lever at this point to ensure free movement and engagement with no binding.
For the cable I made notes on how the old one was installed, then installed the new one. For the blades I used a glove on one hand to hold the blades, then removed the bolts holding the blades. Then just placed the new blades on the spindles and tightened the bolts.
1. Removed mower deck.
2. Removed gas tank.
3. Removed old cable.
4. Installed new cable.
5. Reinstalled mower deck.
6. Reinstalled gas tank.
(Found video on YouTube that showed how to replace the clutch cable and followed along. Only thing I did differently is not remove the clutch assembly. I install
... Read moreed cable from below the dash board)
1. Remove 2 gas tank bolts, and slide the tank out on top of engine (no need to empty it).
2. ThereGÇÖs a pin holding the cable assembly at the top, remove that freeing the cable.
3. Remove old cable.
4. Put new cable in place at the top, and put pin back.
5. Route new cable down through body, and over top of where
... Read more it clips in down below.
6. Be sure to attach spring first, then you can easily pull the cable back through where it clips in at the bottom.
7. Push gas tank back into place and tighten bolts.
That should do it. Just be sure that you donGÇÖt attempt to put it though the clip in area near the bottom and then terminate the spring.
Lawn Mower
- Husqvarna Lawn Mower Model 96043003700 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_6.gif "Part Location Diagram of 532435110 Husqvarna Cable Clutch Manual With Spring.")
_WW_6.gif "Part Location Diagram of 532435110 Husqvarna Cable Clutch Manual With Spring.")
