866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Blade

Part Number: 56631E701MA
MurraySnapper
Availability: 21 in stock
Price: $13.95
Quantity:
Order within the next 9 minutes
and your part ships today!

*This part replaces obsolete part #: 056631E701MA, 720658A and 56631E700MA.

Specifications
Length: 15-3/4"
Center Hole Size: 0.848
Plane: Formed
Width: 2.25
Thickness: 0.134
Cut Direction: RH
Center Hole Shape: Circle
Description:
Genuine OEM replacement Blade, this item is sold individually.
This Blade is used on the Lawn Tractor models shown below.
Most of the Lawn Tractors listed below will use 3 of these blades.
It would be a good idea to purchase 3 extra blades so when your blades on the Tractor need sharpening, you can use your extras.
Product Information
Manufacturer: Murray, Snapper
Product Number: 56631E701MA
Classification: Part
Weight: 1.24 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Murray
Snapper

Products Compatibility

This item works with the following types of products:

  • • Grass Trimmer
  • • Lawn Tractor
Questions & Answers

do you have mulching blades for this scotts ride on mower.I would need 3.
luis for model number 46562X8
Hello Luis, thank you for your question. The mulching blade that will fit your model 46562X8 is Blade Part Number: 56631E701MA. I hope this helps!
Is the center hole 5/8 inch
Travis for model number 46103b blades
Hello Travis, Thank you for contacting us. The center hole is 0.848". Have a great day.
Looking for blades for this model Zero turn mower. 46in. cut
Karen Rust for model number Snapper#Z1803K
Hello Karen, thank you for your inquiry! The correct blade for your model Z1803K is part number 7026407AYP. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 56631E701MA
Splined Spindle Shaft - 94129MA
Belt, Primary - 37X96MA
Jackshaft Housing - 492574MA
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Power Drill, Socket set, Wrench Set, Adjustable Wrench
Jackshaft bearings R&R
Remove drive belt then remove the deck from the mower. Take the guards off, then the blade then the jack shaft housing and shaft. Install new one , don't forget to grease it an the others too.. Put all back together an your done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Primary Belt - 37X89MA
Blade - 56631E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Pneumatic impact wrench
The primary belt was cracking, needed new blades
The package that the belt is sold in has the routing of the belt right on the package. I jacked up the front of the mower, then put jack stands underneath it and blocked the rear wheels. I remove the blade nuts, then the washers and the blades. I the placed the blade adapters on the spindle, followed by the blades, the washers and tightened the blade nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 56631E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Blades could no longer be sharpen
Used jack to raise lawnmower; place lawnmower on jack stands; use a block of wood to stop lawnmower from rolling back wards off jack stands; use another block of wood to stop blades from moving around; use WD 40 to losing up bolts on old blades; grab your socket set while you wait for the WD 40 to work on the bolts; replace one blade at a time; making sure that bolts are good and tight; lower your lawnmower, put away your equipment that you used; run your lawnmower and cut your grass.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 56631E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Impact wrench
Worn blade adapter and worn out blades
Put the mower on blocks to raise the front and block the rear wheels. Make sure the mower is secure and won't move. Remove the blade holder nut and the washers. Remove the worn blade and blade adapter. Place the new blade adapter on the spindle, then the new blade, two washers and tighten the blade nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Blade - 56631E701MA
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Blade replacement
Removed the old blades
Installed the new blades
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Roller - 1001252MA
Blade - 56631E701MA
Belt, Primary - 37X96MA
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
Needed new blades, Primary belt and roller
Took the deck off
Removed blades
Removed belt
Removed roller
Lubed machine
Put back together using my manual
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Primary Belt - 37X89MA
Blade - 56631E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Blades shot and belt worn out
Removed the deck from the mower
Took note on where the belt was positioned
Installed the new belt in the same way
Removed the blade nuts and washers then the blades
Installed the new blades on the spindles
Replaced the washers and tightened the blade nuts
Then attached the deck to the mower
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 56631E701MA
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Impact wrench
Worn out blades
Remove the blade nut and washer then the blade
Make sure the blade adapter is above the blade when you put the new blade on the spindle.
Place the washers on and tighten up the blade nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy