Watch The
Repair Video

Blade

Part Number: 56631E701MA

Order within the next 6 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 056631E701MA, 720658A and 56631E700MA.

Product Information

Manufacturer: Murray, Snapper

Product Number: 56631E701MA

Classification: Part

Weight: 1.24 lbs.

Shipping: Ships Worldwide

Specifications

Length: 15-3/4"
Center Hole Size: 0.848
Plane: Formed
Width: 2.25
Thickness: 0.134
Cut Direction: RH
Center Hole Shape: Circle

Description:

Genuine OEM replacement Blade, this item is sold individually.
This Blade is used on the Lawn Tractor models shown below.
Most of the Lawn Tractors listed below will use 3 of these blades.
It would be a good idea to purchase 3 extra blades so when your blades on the Tractor need sharpening, you can use your extras.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Murray

Snapper

CSLT23460 (7800344) 46" 23Hp Lawn Tractor Lt100 Series
ESLT23460 (7800342E) 46" 23Hp Lawn Tractor Lt100 Series Export
LT23460 (7800207) 46" 23Hp Lawn Tractor Lt100 Series
SLT23460 (7800342) 46" 23Hp Lawn Tractor Lt100 Series
SLT23460FC (7800316) 46" 23Hp Lawn Tractor Lt100 Series
SLT24520 (7800343) 52" 24Hp Lawn Tractor Lt100 Series
SLT24520FC (7800318) 52" 24Hp Lawn Tractor Lt100 Series
ELT2346AWS (2690858) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
ESLT23460AWS (7800545E) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
LT23460AWS (7800478) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
LT23460AWSC (7800542) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
SLT23460AWS (7800545) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
SLT23460AWSC (7800546) 46" 23Hp Hydro Drive Lawn Tractor Lt130 Series
ELT2346AWS (LT130 Series)(2690858) 46-Inch 23hp Hydro Drive Lawn Tractor

LT23460AWS (LT130 Series)(7800478) 46-Inch 23hp Hydro Drive Lawn Tractor
LT23460AWSC (LT130 Series)(7800542) 46-Inch 23hp Hydro Drive Lawn Tractor
SLT23460AWS (LT130 Series)(7800545) 46-Inch 23hp Hydro Drive Lawn Tractor
ESLT23460AWS (LT130 Series)(7800545E) 46-Inch 23hp Hydro Drive Lawn Tractor
SLT23460AWSC (LT130 Series)(7800546) 46-Inch 23hp Hydro Drive Lawn Tractor
SLT23460FC (LT100 Series)(7800316) 46-Inch 23hp Lawn Tractor
SLT24520FC (LT100 Series)(7800318) 52-Inch 24hp Lawn Tractor
SLT24520 (LT100 Series)(7800343) 52-Inch 24hp Lawn Tractor
CSLT23460 (LT100 Series)(7800344) 46-Inch 23hp Lawn Tractor
LT24520 (LT100 Series)(7800317) 52-Inch 24hp Lawn Tractor
SLT23460 (LT100 Series)(7800342) 46-Inch 23hp Lawn Tractor
ESLT23460 (LT100 Series)(7800342E) 46-Inch 23hp Lawn Tractor (Export)
LT23460 (LT100 Series)(7800207) 46-Inch 23hp Lawn Tractor
LT23460 (LT100 Series)(7800315) 46-Inch 23hp Lawn Tractor

Expand the 149 compatible machines

Products Compatibility

This item works with the following types of products:

• Grass Trimmer
• Lawn Tractor

Questions & Answers

Sort by

Do you carry mulching blades for this tractor? If so, part # and price please. Thanks.

Steve for model number 4650 x 92 asked on 2019-11-07

Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 56631E701MA. Hope this helps!

Related Parts: Blade

Did this question help you?

Looking for blades for this model Zero turn mower. 46in. cut

Karen Rust for model number Snapper#Z1803K asked on 2019-04-10

Hello Karen, thank you for your inquiry! The correct blade for your model Z1803K is part number 7026407AYP. I hope this information helps!

Did this question help you?

Is the center hole 5/8 inch

Travis for model number 46103b blades asked on 2019-02-28

Hello Travis, Thank you for contacting us. The center hole is 0.848". Have a great day.

Did this question help you?

do you have mulching blades for this scotts ride on mower.I would need 3.

luis for model number 46562X8 asked on 2018-09-19

Hello Luis, thank you for your question. The mulching blade that will fit your model 46562X8 is Blade Part Number: 56631E701MA. I hope this helps!

Did this question help you?

Repair Instructions: Submitted by Customers Like You

4 of 4 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Blade - 56631E701MA

Splined Spindle Shaft - 94129MA

Belt, Primary - 37X96MA

Jackshaft Housing - 492574MA

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Power Drill, Socket set, Wrench Set, Adjustable Wrench

Jackshaft bearings R&R

Remove drive belt then remove the deck from the mower. Take the guards off, then the blade then the jack shaft housing and shaft. Install new one , don't forget to grease it an the others too.. Put all back together an your done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Primary Belt - 37X89MA

Blade - 56631E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Pneumatic impact wrench

The primary belt was cracking, needed new blades

The package that the belt is sold in has the routing of the belt right on the package. I jacked up the front of the mower, then put jack stands underneath it and blocked the rear wheels. I remove the blade nuts, then the washers and the blades. I the placed the blade adapters on the spindle, followed by the blades, the washers and tightened the blade nuts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Blade - 56631E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blades could no longer be sharpen

Used jack to raise lawnmower; place lawnmower on jack stands; use a block of wood to stop lawnmower from rolling back wards off jack stands; use another block of wood to stop blades from moving around; use WD 40 to losing up bolts on old blades; grab your socket set while you wait for the WD 40 to work on the bolts; replace one blade at a time; making sure that bolts are good and tight; lower your lawnmower, put away your equipment that you used; run your lawnmower and cut your grass.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Blade - 56631E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Impact wrench

Worn blade adapter and worn out blades

Put the mower on blocks to raise the front and block the rear wheels. Make sure the mower is secure and won't move. Remove the blade holder nut and the washers. Remove the worn blade and blade adapter. Place the new blade adapter on the spindle, then the new blade, two washers and tighten the blade nut

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Blade - 56631E701MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blade replacement

Removed the old blades
Installed the new blades

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Roller - 1001252MA

Blade - 56631E701MA

Belt, Primary - 37X96MA

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Socket set, Wrench Set

Needed new blades, Primary belt and roller

Took the deck off
Removed blades
Removed belt
Removed roller
Lubed machine
Put back together using my manual

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Primary Belt - 37X89MA

Blade - 56631E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blades shot and belt worn out

Removed the deck from the mower
Took note on where the belt was positioned
Installed the new belt in the same way
Removed the blade nuts and washers then the blades
Installed the new blades on the spindles
Replaced the washers and tightened the blade nuts
Then attached the deck to the mower

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Blade - 56631E701MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Impact wrench

Worn out blades

Remove the blade nut and washer then the blade
Make sure the blade adapter is above the blade when you put the new blade on the spindle.
Place the washers on and tighten up the blade nut

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Manufacturer: Murray, Snapper

Product Number: 56631E701MA

Classification: Part

Weight: 1.24 lbs.

Shipping: Ships Worldwide