Easy
15-30 minutes
Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.
Tapping Screw 265995-6
OEM part for: Makita
Part Number: 265995-6
$4.99
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Dimension: 4 X 18
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Tapping Screw will fit the following 1136 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Makita
Show More Compatible ModelsThis item works with the following types of products:
- Miter Saw Parts
- Saw Parts
- Sander Parts
- Impact Driver Parts
- Router Parts
- Drill Parts
- Circular Saw Parts
- Planer Parts
- Table Saw Parts
- Chop Saw Parts
- Trimmer Parts
- Jig saw Parts
- Grinder Parts
- Cordless Drill Parts
- Screwdriver Parts
- Impact Wrench Parts
- Vacuum Parts
- Demolition Hammer Parts
- Hammer Drill Parts
- Rotary Hammer Parts
- Nibbler Parts
- Reciprocating Saw Parts
- Chain Saw Parts
- Lawn Mower Parts
- Jointer Parts
- Shear Parts
- Electric Drill Parts
- Laminate Trimmer Parts
- Pole Saw Parts
- Polisher Parts
- Band Saw Parts
- Blower Parts
- Trim Saw Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 660-265-995, 266121-0
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tapping Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Buffer worked intermittently
William - October 3, 2020
Tool Type
Polisher
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wire stripper
Turned out the power cable was bad, went ahead and used new parts because the tool was 18 years old, was surprised they were available, repaired the cord pulling it out of boot, then sliding it back through the boot after finding the problem, parts were fast to come, and since it was a weekend and asked for expedited shipping they gave me a partial discount! Love the graphics on website. Item I repaired was a Makita buffer. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Capsule was misplaced in trash .
Tom - May 23, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Na
Placed screw washer valve in capsule and tightened with
#2 Phillips screwdriver.
Installed on vac housing.
#2 Phillips screwdriver.
Installed on vac housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing cover and screw
Mark - October 6, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced missing lead cover and screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trigger was loose in the handle and wouldn't work predictably. The housing was broken where the trigger mounts, allowing the movement.
Thomas - December 15, 2017
Tool Type
Circular Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, Snap ring pliers
You will have to take the saw mostly apart for this repair, but parts cost a lot less than a new saw if you don't mind the repair work. Start by removing the blade, washers, and bolt. Remove the foot from the saw by removing the pivot screw/nut at the front and the adjustment bolt from the rear (remove the set screw on the lever, then the lever, then the nut and bolt. Remove the blade guard by removing the snap ring, stop button, and return spring. Remove the drive pud (what the blade bolts to) by removing the four retaining screws. Remove the blade housing by removing the screws from the backside. Remove the handle cover. Remove the white plastic cover behind the blade housing. Pull the armature out of the field coil (might have to tap on the back of the motor housing to get the bearing out of the bore, otherwise it's held in with magnetic force). Carefully remove the wiring from the handle for the cord, trigger, and light. Remove the field coil screws and the coil (turning the housing over and thumping it against a wood block with release it; it's pressure fit). Reinstall the field coil into the new motor housing (line up the screw holes and tap it in with a drift ot screwdriver until it seats). Reinstall the field coil screws. Carefully route the wiring through the guides in the housing. If the cord needs replacement now's a good time. The rest of reassembly is just the reverse of disassembly. Be sure to test the saw when done. These are relatively simple tools to repair, just take your time and snap some pictures if you need to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
