eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  265995-6 Tapping Screw
photo thumbnailphoto thumbnail360 degree photo thumbnail
Tapping Screw

Tapping Screw

Part Number: 265995-6
Makita
Availability: 25+ in stock
Price: $2.03
Order within the next 10 hours
and your part ships today!

*This part replaces obsolete part #: 660-265-995 and 266121-0.

Product Information
Manufacturer: Makita
Product Number: 265995-6
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Specifications
  • Dimension: 4 X 18
Description:
Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.
Compatibility

This part is compatible with the following machines:

Makita
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Chop Saw
  • • Circular Saw
  • • Cordless Drill
  • • Demolition Hammer
  • • Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Driver
  • • Impact Wrench
  • • Jig saw
  • • Lawn Mower
  • • Miter Saw
  • • Nibbler
  • • Planer
  • • Reciprocating Saw
  • • Rotary Hammer
  • • Router
  • • Sander
  • • Saw
  • • Screwdriver
  • • Table Saw
  • • Trimmer
  • • Vacuum
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Vacuum
Parts Used:
Tapping Screw - 265995-6
Flat Washer 4 - 941051-3
Stay - 458467-0
Valve - 424208-6
Capsule - 451226-1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Na
Capsule was misplaced in trash .
Placed screw washer valve in capsule and tightened with
#2 Phillips screwdriver.

Installed on vac housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Tapping Screw - 265995-6
Lead Cover Holder - 451000-7
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Missing cover and screw
Replaced missing lead cover and screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 682505-8
Tapping Screw - 265995-6
Power Cord - 664463-0
Motor Housing - 152989-9
Handle Cover - 417712-2
Name Plate - 853564-1
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Snap ring pliers
Trigger was loose in the handle and wouldn't work predictably. The housing was broken where the trigger mounts, allowing the movement.
You will have to take the saw mostly apart for this repair, but parts cost a lot less than a new saw if you don't mind the repair work. Start by removing the blade, washers, and bolt. Remove the foot from the saw by removing the pivot screw/nut at the front and the adjustment bolt from the rear (remove the set screw on the lever, then the lever, then the nut and bolt. Remove the blade guard by removing the snap ring, stop button, and return spring. Remove the drive pud (what the blade bolts to) by removing the four retaining screws. Remove the blade housing by removing the screws from the backside. Remove the handle cover. Remove the white plastic cover behind the blade housing. Pull the armature out of the field coil (might have to tap on the back of the motor housing to get the bearing out of the bore, otherwise it's held in with magnetic force). Carefully remove the wiring from the handle for the cord, trigger, and light. Remove the field coil screws and the coil (turning the housing over and thumping it against a wood block with release it; it's pressure fit). Reinstall the field coil into the new motor housing (line up the screw holes and tap it in with a drift ot screwdriver until it seats). Reinstall the field coil screws. Carefully route the wiring through the guides in the housing. If the cord needs replacement now's a good time. The rest of reassembly is just the reverse of disassembly. Be sure to test the saw when done. These are relatively simple tools to repair, just take your time and snap some pictures if you need to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • valve screw
    timely shipping LXT vac back in service
    Tom - May 22, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Makita
    Product Number: 265995-6
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy