Medium
15-30 minutes
This is a genuine OEM replacement part designed for use with a variety of power tools. It is made out of metal and it is sold individually. It is a standard hardware which has multiple applications based on your tool.
You would need a wrench to tighten/loosen this nut.
Nut,hex 330015-03
OEM part for: DeWALT, Porter Cable, Delta, Black and Decker
Part Number: 330015-03
$4.99
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Nut,hex will fit the following 490 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
DeWALT
Delta
Black and Decker
Show More Compatible ModelsThis item works with the following types of products:
- Chop Saw Parts
- Saw Parts
- Table Saw Parts
- Miter Saw Parts
- Circular Saw Parts
- Drill Parts
- Drill Press Parts
- Band Saw Parts
- Scroll Saw Parts
- Sander Parts
- Planer Parts
- Compressor Parts
- Shaper Parts
- Jig saw Parts
- Pole Saw Parts
- Tile Saw Parts
- Trim Saw Parts
- Jointer Parts
- Lathe Parts
- Radial Arm Saw Parts
- Grinder Parts
- Router Parts
- Engine Parts
- Polisher Parts
This part replaces obsolete part #: 5134622-00, 491964-00, 1243398
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Nut,hex
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Missing Handle to Lock Rip Fence in Place
Richard - January 6, 2017
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Tap
Parts Used
The rip fence handle had been missing for some time. I had been using a screwdriver to lock it in place for more than a couple of years and felt it time to fix it correctly. When trying to make this simple replacement I realized that all the years of using a screwdriver had damaged the threads in the locking cam. I had to re tap...(chase the threads) in the cam. After that the part was easily threaded into the cam and the locking mechanism now works as it should.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Height Adjustment Screw was worn out
Don - January 2, 2017
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Adjustable Wrench
Removed the height adjustment rotating handle and the locking mechanism to allow for removal of the front face plate. With the use of two locking pliers I forced the Follower Nut off the badly cross threaded Height Adjustment Screw and was able to remove both. Simply reversed the procedure and replaced damaged parts with new. Tested the new adjustment screw and then put everything back together.
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dried out bearing, causing noise and eventually blade wobble and missing nut on blade adjustment wheel
Marion - February 9, 2016
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, 6 point torx bits
I took off the lower blade housing, blade, spacer. Clean dust from motor.
I took out the 5 torx screws behind the blade which has the slide plate sandwiched in it, this splits and loosens the motor.
My bad bearing was pressed into the gear case cover, and was in pieces. I had to replace the whole gear case cover to get the new bearing which included the second bearing that was pressed on the shaft. I did reuse the rubber o ring which could be replaced.
I cleaned out and replaced grease.
Reinstalled motor making sure 4 glide pads are in place.
New nut on blade adjustment wheel may need loctite.
I took out the 5 torx screws behind the blade which has the slide plate sandwiched in it, this splits and loosens the motor.
My bad bearing was pressed into the gear case cover, and was in pieces. I had to replace the whole gear case cover to get the new bearing which included the second bearing that was pressed on the shaft. I did reuse the rubber o ring which could be replaced.
I cleaned out and replaced grease.
Reinstalled motor making sure 4 glide pads are in place.
New nut on blade adjustment wheel may need loctite.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced the power switch that had gone bad and the handle for the fence
Steve - November 28, 2015
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
Three screws and I popped in the new switch, put my new handle on the fence and I had a brand new saw again. I couldn't have asked for an easier time finding and receiving my parts, the people I spoke with were knowledgeable and helped me find the right part number for my repair. Delivery was only a few days and after 15 minutes the saw was back up and running. My 10 year old table saw has new life and I couldn't be happier. Thank you very much.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
