eReplacementParts.com
877-346-4814
Preferred Partners of
Coleman
Husqvarna
Karcher
MK Diamond
MTD
Porter Cable Parts
Preferred Partners of
MK Diamond MTD Coleman Husqvarna Karcher MK Diamond MTD Coleman Husqvarna

Nut,​Hex

Part Number: 330015-03
DeWALTPorter CableDeltaBlack and Decker
Availability: 17 in stock
Price: $1.99
Order within the next 10 hours
and your part ships today!

*This part replaces obsolete part #: 5134622-00, 491964-00 and 1243398.

Product Information
Manufacturer: DeWALT, Porter Cable, Delta, Black and Decker
Product Number: 330015-03
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine OEM replacement part designed for use with a variety of power tools. It is made out of metal and it is sold individually. It is a standard hardware which has multiple applications based on your tool.

You would need a wrench to tighten/loosen this nut.
Compatibility

This part is compatible with the following machines:

Porter Cable
DeWALT
Delta
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Band Saw
  • • Chop Saw
  • • Circular Saw
  • • Drill
  • • Drill Press
  • • Miter Saw
  • • Planer
  • • Sander
  • • Saw
  • • Scroll Saw
  • • Table Saw
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Table Saw
Parts Used:
Nut,Hex - 330015-03
Handle - 491718-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Tap
Missing Handle to Lock Rip Fence in Place
The rip fence handle had been missing for some time. I had been using a screwdriver to lock it in place for more than a couple of years and felt it time to fix it correctly. When trying to make this simple replacement I realized that all the years of using a screwdriver had damaged the threads in the locking cam. I had to re tap...(chase the threads) in the cam. After that the part was easily threaded into the cam and the locking mechanism now works as it should.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Nut,Hex - 330015-03
Follower Nut - 386158-00
Screw Asy,Heigt - 153473-00
Washer,Thrust - 153441-00
Washer,Wave - 380061-00
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Adjustable Wrench
Height Adjustment Screw was worn out
Removed the height adjustment rotating handle and the locking mechanism to allow for removal of the front face plate. With the use of two locking pliers I forced the Follower Nut off the badly cross threaded Height Adjustment Screw and was able to remove both. Simply reversed the procedure and replaced damaged parts with new. Tested the new adjustment screw and then put everything back together.
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Grease - 93488-00
Nut,Hex - 330015-03
Gear Case Cover - 153476-04
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, 6 point torx bits
Dried out bearing, causing noise and eventually blade wobble and missing nut on blade adjustment wheel
I took off the lower blade housing, blade, spacer. Clean dust from motor.
I took out the 5 torx screws behind the blade which has the slide plate sandwiched in it, this splits and loosens the motor.
My bad bearing was pressed into the gear case cover, and was in pieces. I had to replace the whole gear case cover to get the new bearing which included the second bearing that was pressed on the shaft. I did reuse the rubber o ring which could be replaced.
I cleaned out and replaced grease.
Reinstalled motor making sure 4 glide pads are in place.
New nut on blade adjustment wheel may need loctite.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Nut,Hex - 330015-03
Handle - 489076-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Replaced the power switch that had gone bad and the handle for the fence
Three screws and I popped in the new switch, put my new handle on the fence and I had a brand new saw again. I couldn't have asked for an easier time finding and receiving my parts, the people I spoke with were knowledgeable and helped me find the right part number for my repair. Delivery was only a few days and after 15 minutes the saw was back up and running. My 10 year old table saw has new life and I couldn't be happier. Thank you very much.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Right part
    Perfect fit
    Guest - July 8, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT, Porter Cable, Delta, Black and Decker
    Product Number: 330015-03
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal