Easy
15-30 minutes
This compressor repair kit includes parts commonly responsible for low compression. It includes the cylinder tube, piston ring, piston ring clamp screw, and the two o-rings on either side of the valve plate. This kit is a genuine OEM Porter-Cable parts set, not generic or aftermarket. Please be aware that this kit does not include the piston or any other internal compression components.
Cylinder Replacement Kit K-0650
OEM part for: Porter Cable, DeVilbiss, Black and Decker
Part Number: K-0650
$67.48
In Stock
Order within the next 37 minutes and your part ships today! 
Jump To:
Product Description ?
- Dimensions
- Top ID: 2.24" OD: 2.46"
- Bottom ID: 2.35" OD: 2.93
- Classification: Part
- Weight: 0.40 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Cylinder Replacement Kit will fit the following 226 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
DeVilbiss
Black and Decker
Show More Compatible ModelsThis item works with the following types of products:
- Compressor Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
9
4 stars
4
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
The parts were great! Better then the original!
My air compressor is running like new. I'm very happy that is was able to find replacement parts!
Douglas -
April 6, 2021
Verified Purchase
Great service
part worked as advertised
Guest -
July 28, 2020
Verified Purchase
it came very quick, great price!!
great part!!
Guest -
July 20, 2020
Verified Purchase
Best service ever
Part was exactly what I needed down to the gaskets .Great quick service provider thanks a million guys !!!!
Guest -
June 15, 2020
Verified Purchase
Air compressor
I got a replacement parts for my air compressor and they were perfect it runs like a brand new one I’m very well pleased and my order came in on time and a banner distance they said it would
Guest -
May 18, 2020
Verified Purchase
Air compressor repair
The part worked out great & installation was quick & easy not to mention it saved me the cost of buying a new compressor.
Guest -
November 2, 2019
Verified Purchase
Piece of cake repair
My compressor wouldn't fill and I ordered this kit. It arrived quickly and in good condition. It was very easy to install. I also found the manifold on top of the cylinder need replacement too. When I received it I had an extra set of gaskets since both parts came with the gaskets. After replacement of both parts my compressor fills much quicker than before! $100 worth of parts, 1/2 hour or so of labor and problem solved. Beats spending over $300 for a new compressor!
Guest -
August 19, 2019
Verified Purchase
Parts fit perfectly. Thank you!
My air compressor is running like new again!!!
Guest -
July 29, 2019
Verified Purchase
Sleeve
Worked as described. Done in 15 mins. Compressor working perfect!!
Guest -
May 26, 2019
Verified Purchase
Compressor wasn't pumping air. Replaced with your new parts & working good now. Good instructions with part was good to have. Made it go easier.
Parts were shipped ad said. Good instructions with part were a plus too. Pumping air like new again.
Guest -
December 24, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cylinder Replacement Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Piston ring wore out and allowed the piston to gouge the cylinder liner.
Mark - December 4, 2015
👍 7 of 9 people found this instruction helpful
Tool Type
Compressor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Removed plastic shroud around the motor and pump.
Removed cylinder head.
Removed piston ring and cylinder liner.
Reassemble by reverse of the above.
The directions in the repair kit were pictorial and easy to understand.
Removed cylinder head.
Removed piston ring and cylinder liner.
Reassemble by reverse of the above.
The directions in the repair kit were pictorial and easy to understand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Compressor was really slow to build air pressure and really loud
Kevin - March 28, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver, Adjustable Wrench
Parts Used
Simply follow the directions that come with the kit, they describe the whole process. In my case I had to do an extra step because the new cylinder sleeves were slightly longer than the originals and had a lip at the bottom that wouldn't let the piston head fit through from the bottom. I had to remove the connecting rods and feed the pistons through from the top. Other than that if you just follow the instructions that come with the kit it's real easy. The compressor fills up quick now and is much quieter.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Stopped pumping air but was still running
bobby - November 13, 2015
👍 3 of 3 people found this instruction helpful
Tool Type
Compressor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Hex wrenches
Parts Used
Remove the four bolts that secure the head and remove the head. Remove the piston. Remove the cylinder and replace with the new one. Remove and replace the piston ring. Insert the piston through the cylinder and reattach to the motor. Replace the o-rings on either side of the valve plate. Reassemble the head and valve plate and secure with the four screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Unit would not build air pressure
Ken - February 10, 2022
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Torx 20 and 25
Parts Used
Watched the video from e replacement.
Each step was clear and concise.
I also cleaned all parts that were not replaced.
Each step was clear and concise.
I also cleaned all parts that were not replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
compressor not building pressure
Pat - June 17, 2020
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
After looking at you tube- we took apart the compressor and located the cylinder. the gasket had a tear in it and the cylinder itself was etched. We ordered cylinder replacement kit and a new valve plate assembly. Parts arrived in a few days. Watched you tube again to see how to replace parts. Was relatively easy to do and now compressor is working great.
Saved ourselves from having to buy a new compressor. thanks
Saved ourselves from having to buy a new compressor. thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would run but not compress
George - May 31, 2020
Tool Type
Compressor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set
1. Replaced the cylinder and valve plate but same problem.
2. Noticed the eccentric was broken would not grip the motor shaft.
3. Eccentric is no longer available.
4. Drilled through the eccentric and motor shaft and installed a pin.
Wish there was an instruction on aligning the fan with an offset hole.
2. Noticed the eccentric was broken would not grip the motor shaft.
3. Eccentric is no longer available.
4. Drilled through the eccentric and motor shaft and installed a pin.
Wish there was an instruction on aligning the fan with an offset hole.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Compressor wouldn't build pressure
Gabe - November 27, 2019
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Made sure compressor was unplugged from power source, removed cover bolts and cylinder head bolts, since piston seal was worn out slid cylinder sleeve out, removed the Allen head bolt from piston and removed worn out seal. While holding fan on motor to where piston about halfway down installed new cylinder sleeve and turned fan to where piston at top dead center. Placed the new seal on it then attached top and tightened the Allen bolt. Separated two plates and replaced gaskets after cleaning debris off. Reassembled the cylinder head bolts and torqued down , then reinstalled motor cover and two bolts. Plugged in and turned on compressor and it started building pressure fast, found two leaks on metal tube line tightened the ends and back to better than new. Thanks to the company as they saved me and my dad about $480 for a new compressor that was about the same cfm rating.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
15# max pressure
Larry - December 22, 2018
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Parts Used
Removed and replaced old cylinder and piston with new cylinder and ring on old piston. Works great pumps to 120# in <5 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cylinder worn
RICHARD - March 12, 2018
Tool Type
Compressor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Impact wrench
Parts Used
The kit included a great set of installation instructions, made the job much easier.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No compression the piston seal and cylinder were worn out
Kevin - March 3, 2018
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Adjustable Wrench, Small pic to remove old o-rings
Parts Used
Took off the head bolts disconnect rod bolt pullout the cylinder and rod thru the top remove the screw in the top of the piston replace seal ring replace cylinder replace o rings reattach piston to bell crank replace head and read valve assy. Done works like new. The kit also includes a great set of instructions.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
