Easy
30-60 minutes
This replacement belt is an authentic OEM sourced item, not an aftermarket imitation. It is specially designed for use with riding lawn mowers and tractors. This is the main belt that drives the blades. When replacing this belt make sure to clean the pulleys off to ensure top performance and life of the new belt. Inspect belts periodically and replace them when worn or stretched. Please note, this rubber part is sold individually. You will need a wrench set to complete this repair.
Belt-v Type 954-04062
OEM part for: MTD, Yard Machines, Bolens, Yard Man, Troy-Bilt, Husky
Part Number: 954-04062
$51.27
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Belt-v Type will fit the following 363 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Yard Machines
MTD
Bolens
Yard Man
Troy-Bilt
Husky
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
This part replaces obsolete part #: 754-04062
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Great part
Belt arrived earlier than expected. Fit perfectly. Lawnmower working well
Guest -
June 23, 2020
Verified Purchase
Original part
Good
Guest -
May 27, 2020
Verified Purchase
Great part worked with my Bolen lawn tractor.
This part and all the other parts that I have ordered work great. I have fixed the transmission, changed blades and belts and my mower works like new. Great service
Guest -
May 6, 2020
Verified Purchase
Simple deck belt
Always receive parts in a timely manner and always correct Thank You
Guest -
April 18, 2020
Verified Purchase
Belt was just as ordered. This was the oem belt. Heavier than aftermarket belts
Fit perfect. Installation was fairly easy. Belt arrived in about 4 days.
Guest -
October 1, 2019
Verified Purchase
Unfortunate repair
Replaced the belt. When I started my Bolens riding mower the belt came off the drive (motor) pulley. Upon examination I found that the belt was badly damaged and not usable. Further investigation found the the tension spring on the variable tension pulley was broken on one end (disconnected). I found a replacement spring locally and another new belt. Replaced both of these and the blades seem to be engaging OK.
Guest -
September 19, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt-v Type
This is a 2007, 42" cut, model 13A1762F729, what exact belt it uses? I think 96" is too longThanks for the help
Hilton
for model number 13A1762F729
asked on 2023-04-28
Hello Hilton, Thank you for writing. The V-Belt to drive the Blades is Part Number: 954-04142. We hope this helps!
eReplacementParts Team April 28, 2023
What size V belt do I need for a 42" Troy-bilt, pony, riding lawn mower
Amos
for model number 13WN77KS011
asked on 2022-04-15
Hello Amos, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 954-04060C. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 15, 2022
Year 2013
Amos
for model number 13WN77KS011
asked on 2022-04-15
Hello Amos, Thank you for writing. Please feel free to submit a new question with how we can assist you and we will be happy to help you!
eReplacementParts Team April 15, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
All belts were worn out from age.would not spin blades or pull me up a hill.
Edward - May 18, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set, I used a vice grip to help hold the pully .
First I had to raise the rear of the tractor an remove the rear wheels. Remove the bearing cap an bearings from bottom pulley. Remove nut on top rear pulley both at rear of tractor. Then I removed the spring tensioner from the drive belt.Remove old belt an thread new belt up an around front pulley on motor that way you don't have to remove pulley on motor. Put the new belt on pulley and replace pulleys. Attach tensioner spring. Put wheels back on.To install new cut belt I just had to remove two pulley guards an remove one tensioner pulley.The pulley was held on with a nut an bolt, both very easy to get at. Remove old and replace new. Remember placement of belt to insure proper placement.The belt will fit in other ways but will only work in proper direction.Oops.Replace one pulley and pulley guards.No need to remove any springs in this application. You are ready to cut. The hole process took about 1-1/2 hours. It is best to have 3/8 an 1/4 inch socket sets.The 1/4 inch set works best on the cut deck.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pulley broke
Tim - August 16, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Adjustable Wrench
Removed the deck from the mower
Removed old pulley put new one on and replaced belt
Removed old pulley put new one on and replaced belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced steering shaft and deck belt
Temple - June 13, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set, Ratchet set; brake over bar
1. Lowered deck
2. Moved fuel tank to side.
3. Used #4 phillips bite with brake over to remove hex patch bolt from shaft lower mount point.
4. Remove steering wheel center cover and bolt/remove wheel
5. Remove old shaft; grease gear on new shaft an install with new hex patch bolt.
6. All spacer and washers were ok.
2. Moved fuel tank to side.
3. Used #4 phillips bite with brake over to remove hex patch bolt from shaft lower mount point.
4. Remove steering wheel center cover and bolt/remove wheel
5. Remove old shaft; grease gear on new shaft an install with new hex patch bolt.
6. All spacer and washers were ok.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blades were bad .
connie - August 2, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Nutdriver
Just replaced the blades and the belt. Had to replace my engagement blade cable to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
V-belt was worn out/stretched and the idler pulley was bent and had jagged edges
Harry - July 8, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
1. Removed deck from the mower for easier work space.
2. Removed idler pulley and v-belt.
3. Installed the new idler pulley and v-belt to the mounting arm.
4. Installed the deck to the mower, checked all connections, leveled the deck per the instructions.
5. Started and tested in a safe area away from the house and any other persons.
6. The parts worked great, operates like a new mower.
2. Removed idler pulley and v-belt.
3. Installed the new idler pulley and v-belt to the mounting arm.
4. Installed the deck to the mower, checked all connections, leveled the deck per the instructions.
5. Started and tested in a safe area away from the house and any other persons.
6. The parts worked great, operates like a new mower.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed a new mower belt.
Eldon - May 19, 2017
👍 2 of 4 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Placed the belt around the pulleys.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drive belt wore out.
alfred - May 31, 2017
👍 0 of 3 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set
Parts Used
Removed the battery, removed the pulley with 7/8 claw socket, installed the belt on the pulley and reinstalled the pulley to rear ended. Then, installed the battery and made a test run on the lawn mower.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
