This replacement belt is specially manufactured for use on Delta power tools. It is a genuine item that is sourced directly from original equipment manufacturer. It is commonly used as the main drive belt on band/table saws and drill presses. This belt is made out of rubber material and it is sold individually.
You would need a screwdriver to complete a repair.
• Remove the belt cover
• Replace the old belt with the new one
• Secure the housing
Belt 49-034
OEM part for: Delta
Part Number: 49-034
Product Description ?
- Classification: Part
- Weight: 0.21 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 71 machines
Delta
This item works with the following types of products:
- Drill Parts
- Drill Press Parts
- Band Saw Parts
- Saw Parts
- Chop Saw Parts
- Jig saw Parts
- Pole Saw Parts
- Table Saw Parts
- Tile Saw Parts
- Trim Saw Parts
- Lathe Parts
This part replaces obsolete part #: 643928
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Defective drive belt on table saw
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
Bad v belt
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools required.
Parts Used
worn out belt on older Delta saw
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none required
Parts Used
By belt for my table saw was stretched out and causing my table saw to vibrate
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
removed old belt and but new one on
Put belt cover back on
SUPER EASY
worn belt
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, did not need any tools
Parts Used
Belt was old.
2. Removed the old belt.
3. Installed the new belt.
4. Replaced the belt cover.
Bit was old and worn. Power cord was cut in half
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
The old belt was worn and was losing torque
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools were neede for this repair
Parts Used
Table saw vibrating, worn belt
Place the new belt on the arbor pulley, then lift the motor and place the belt on the motor pulley
Burnt switch and belt breaking needs replacing
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.