Washer-Sprocket
Part Number: 530016262
Leaves our warehouse within
4 - 9 business days
4 - 9 business days
Product Information
| Manufacturer: Poulan |
| Product Number: 530016262 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
Description:
| This is a genuine replacement part sourced from the original manufacturer for use with chainsaws and electric saws made by Poulan. The user will need to replace this washer sprocket if it is missing or not working correctly. This part is made of metal and sold individually. |
Compatibility
This part is compatible with the following machines:
the 15 compatible machines
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Star Drive Hand Screwdriver
Poulan Electric model ES300 - Replaced Gear Drive and Sprocket
Remove chain and bar
Empty chain oil
Remove the Star Drive Screws
Push the handle slightly forward and pull it loose.
Remove Ring Retainer and Sprocket
Remove gear drive and washer
Replace gear drive and washer (make sure washer is on same side the old one came off.
Carefully put the case cover back on engaging the gear drive
Before screwing the screws, put the new sprocket washer and washer on, but before putting the new ring retainer on, check to see that the sprocket turns the shaft from the motor.
Affix the Ring Retainer (you can use a small screw driver and needle nose pliers for this)
Replace the handle
Replace the screws..
Replace the bar and chain ( I purchased a new 16", .050 gauge, 3/8" Pitch Bar and Chain from Home Depot. There are no Poulan Bar and Chain for this model.
Charlie R
Plug it in and tested. works like brand new
Empty chain oil
Remove the Star Drive Screws
Push the handle slightly forward and pull it loose.
Remove Ring Retainer and Sprocket
Remove gear drive and washer
Replace gear drive and washer (make sure washer is on same side the old one came off.
Carefully put the case cover back on engaging the gear drive
Before screwing the screws, put the new sprocket washer and washer on, but before putting the new ring retainer on, check to see that the sprocket turns the shaft from the motor.
Affix the Ring Retainer (you can use a small screw driver and needle nose pliers for this)
Replace the handle
Replace the screws..
Replace the bar and chain ( I purchased a new 16", .050 gauge, 3/8" Pitch Bar and Chain from Home Depot. There are no Poulan Bar and Chain for this model.
Charlie R
Plug it in and tested. works like brand new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Ring-retainer release tool
Worn sprocket gear
Removed chain and bar from chainsaw after loosening tension on chain and removing the chain and sprocket gear cover. Using a release tool I removed the old ring-retainer,sprocket gear and washer.put on new washer, sprocket gear and ring retainer. re-installed the bar , chain and cover. re-tighten the chain . Repair is completed !!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
| Manufacturer: Poulan |
| Product Number: 530016262 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
