866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Bissell Parts  B-32074 Vacuum Belts

Vacuum Belts

Part Number: B-32074
Bissell
Availability: 25+ in stock
Price: $5.06
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 203-1093, B-203-1093 and 32074.

Description:
Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.
Product Information
Manufacturer: Bissell
Product Number: B-32074
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Bissell

Products Compatibility

This item works with the following types of products:

  • • Vacuum
Questions & Answers

I have upright vacuum pet hair eraser. Model 3920 Wondering if these belts will fit it. It says it does. Thanks
Susan
Hi Susan and thank you for your inquiry. Yes according to the chart these belts will work with your model. Hope this helps.
what part can help if the vacuum suction is failing?
Emma Bowman for model number 6579-3
Hello Emma, thank you for your inquiry! Parts that fix "No suction / low suction": 44% of time Foam Filter Part # B-203-8161 $6.94 23% of time Foam Filter Pleated Circular Filter Part # B-203-1464 $9.19 9% of time Pleated Circular Filter Lever Filter Part # B-203-1215 $3.99 8% of time Lever Filter Vacuum Belts Part # B-32074 $5.06 I hope this information helps!
Do you have a belt for model 1322?
Don cole for model number 1322
Hi Don, Thank you for your question. For your model, the belts are sold in a package of 2. The part number listed under your model number for the package of 2 belts is B-32074. I hope this helps. Thank you and have a great day!
Repair Instructions: Submitted by Customers Like You
9 of 11 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum drive belt needed replacement.
1. Removed 2 screws from the bottom plate.
2. Lifted off bottom plate and remove beater bar and old drive belt.
3. Cleaned all threads etc from beater bar.
4. Reassembled in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 10 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Worn out belt
I removed the access plate, then removed the belt from the motor spindle, then removed the brushroll. I then put the new belt around the brush roll set it in place and stretched the belt around the motor spindle. and then replaced the access plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Crevice Tool - B-203-1063
Vacuum Belts - B-32074
Brushroll Assy - B-203-2448
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushroll stopped turning, belt started to smoke.
1. Unscrewed 4 phillips head screws from belt cover.
2. Took off belt.
3. Slipped out roller.
4. Put new belt around roller, other end of belt on drive shaft.
5. Slid roller into grooves.
6. Replaced belt cover, installed screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Brush Roll - B-203-1289
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belt was worn out and roller no longer turned (hair embedded in outer bearings)
Unscrewed roller cover, removed old roller and belt, the new ones go right back in the same way, screwed cover back on, washed the filters since I had the time, when dry put them back in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum-belt broke.
Unscrewed the cover plate, pulled out the beater brush, wrapped the belt around the small turn post and then on to the beater brush. Slid the beater brush back into place and screwed the cover plate back on to finish.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Handle Release Pedal - B-203-0052
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, air compressor
release pedal broke
Belts were easy, unlatch the roller cover and pull the roller out install the new belt, I used a air compressor to blow out the vacuum the release pedal wasn't hard just a pain. Youtube shows prying the holders apart with 2 screw drivers not so on this one. I had to pry each side holder out and press the old one out one side at a time. Then to reinstall you push the new one into place from the top side.
But it is all plastic so I was very careful it did snap into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
15" Brush Assembly - B-203-1283
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Roller bar wouldn't turn
New roller and belt. Very easy to repair and the vacuum is working great now!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belts were getting too loose.
Just replaced the old belt with a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Belt had broken
I had to dismantle the base to install the new belt. About ten screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belt was stretched wouldn't pick up.
Unscrewed the screws, replaced the belt put screws back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Perfect match,
    The parts i got fit exact. I'm happy with the prompt service I received from you! Now my vacume cleaner REALLY SUCKS literally! Thanks. J.C.
    Guest - 29 days ago Verified Purchase
    Everything was delivered as promised and works great.
    The woman I dealt was very professional and helpful.
    Guest - May 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy