Easy
Less than 15 minutes
This is an authentic replacement part manufactured for use with bagless upright vacuums. The brush roll is used to pick up dirt by rotating bristles over the surface being vacuumed. The brush roll is sold as and individual replacement part.
Brush Roll B-203-1289
OEM part for: Bissell
Part Number: B-203-1289
$15.10
In Stock
Order within the next 11 hours and your part ships today! 
Compatibility
This part will fit the following 2 machines
Bissell
6582 Powerforce Bagless Upright Vacuum View Diagrams & Manuals
6583 Powerforce Bagless Upright Vacuum View Diagrams & Manuals
This item works with the following types of products:
- Vacuum Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Roll
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Roller bearings had frozen from wear
Glenn - May 29, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Unscrewed 4 screws holding cover
2. Removed cover and lifted end opposite belt then slid belted end out of belt.
3. Reversed procedure to install
Great fit, great part, happy wife
2. Removed cover and lifted end opposite belt then slid belted end out of belt.
3. Reversed procedure to install
Great fit, great part, happy wife
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Belt on vacuum and roller
Donna - October 5, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1 Removed the old belt and roller
2 Put new belt on
3 Put new roller on
4 Screw the top back on
5 And done
2 Put new belt on
3 Put new roller on
4 Screw the top back on
5 And done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Belt was worn out and roller no longer turned (hair embedded in outer bearings)
Tammy - April 27, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed roller cover, removed old roller and belt, the new ones go right back in the same way, screwed cover back on, washed the filters since I had the time, when dry put them back in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
brush on vacuum was bad
Vernon - March 19, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Replaced roller brush on my vacuum cleaner
Did you find this story helpful?
Thanks for voting and helping fellow customers!
brush roll bearings wore out
Greg - February 13, 2019
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
remove 4 screws holding brush roll and belt guard in place
removed guard
pulled out brush roll
removed belt from brush roll
put new brush roll through belt
lined up the new brush roll square end tab and round end with slots and inserted brush roll into place
positioned brush roll and belt guard in place
reinserted 4 screws with screwdriver
removed guard
pulled out brush roll
removed belt from brush roll
put new brush roll through belt
lined up the new brush roll square end tab and round end with slots and inserted brush roll into place
positioned brush roll and belt guard in place
reinserted 4 screws with screwdriver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brush roll doesn't work
Hector - January 23, 2017
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Remove the cover.
2. Remove the brush roll with the belt.
3. Replace the new brush roll with a new belt.
4. Replace the cover.
2. Remove the brush roll with the belt.
3. Replace the new brush roll with a new belt.
4. Replace the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed new brush roller.
Robert - November 11, 2015
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Just remove brush roll cover, removed old brush roll, then snapped the new brush roll in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
