eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  411478-6 Switch Button
Switch Button

Switch Button

Part Number: 411478-6
Makita
Availability: 25+ in stock
Price: $2.03
Order within the next 47 minutes
and your part ships today!
Product Information
Manufacturer: Makita
Product Number: 411478-6
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Specifications
  • Genuine O.E.M. Makita replacement switch button
  • Acts as a safety for many Makita switches
Description:
This switch activator button is a genuine Makita replacement part, It is sold individually.
It has to be pressed to activate the power switch.
This is a very common replacement part. It is advised to order one or two extra to keep on hand.

This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models.
Compatibility

This part is compatible with the following machines:

Expand the 63 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chop Saw
  • • Miter Saw
  • • Pole Saw
  • • Saw
  • • Table Saw
Questions & Answers

Is this the button on top of the handle which aligns with the thumb?
Bob for model number lS1212
Hello Bob and thanks for writing. Yes, it does. We hope this helps. Please contact us anytime.
Miter saw trigger button missing. Took handle apart to check for broken part. Can't figure out how lock lever fits back in.
Dan for model number LS1013
Hello, Thank you for writing! Looking at your model number it looks like the compressison spring will need to be directly under the lock lever. You will need to get that set in and pushed down for the handle to click itself back together. Think link here will show you a diagram how to install it. The lock lever is part#38. https://www.ereplacementparts.com/makita-ls1013-miter-saw-parts-c-97_98_99_100.html We hope this helps, good luck with this repair!
Repair Instructions: Submitted by Customers Like You
18 of 18 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Makita Miter Saw Trigger Button Missing - Saw Won't Start
Push the new trigger in the hole and you are fixed. Common problem with Makita - easy fix though - I try to keep a couple extra buttons around just in case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
16 of 17 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
The switch button popped out of miter saw handle
Easy completion.
1. Confirm there are no broken parts of the previous switch button left in the hole. (Nope.) (Confirm there are no broken parts of the dowel you were using in place of the switch button as well. Yep, there is. Crap. Needle nose, curse a bit. Extract small sliver of wood. Done.)
2. Take new switch button and insert into the hole.
2a. Turn switch button around and insert the small end into the hole. (Got it.)
3. Push until it clicks into place. (Click!)
4. Finally find the original switch button that you had been searching for over the past two weeks. (What the...????! Has it been there the whole time???)
5. Try to sell old switch button on eBay.
Seriously, the switch button is as easy of a repair as any I have ever seen. This thing pops in. I have had tougher times getting a coffee cup lid to seat properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Pan Head Screw - 911113-1
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes worn, missing parts
Remove the brush caps with a small screwdriver, then removed the old brushes, then I installed the new brush set. I then was able to just push the new switch button in the housing. I then was able to finally use pointer again by screwing it in. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chop Saw
Parts Used:
Switch Button - 411478-6
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw wouldn't start
1. Pulled out the Switch Button and put in the new.
2. Unscrewed the plastic buttons that holds the Carbon Brushes (2 each) and installed the new brushes.
3. Tried running it...came on immediately.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Safety switch lost.
Went to your site, found the part, bought it. It worked perfectly the first time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were needed
Safety start button was broken and fell out of saw.
I pushed the new button into place and it snapped right in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Switch button missing
I pushed the new button in the hole in the handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Button was missing
Just pressed the new switch button into place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Lost safety button
Just pushed in the new replacement part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch Button - 411478-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Saw switch would not operate
Replaced the safety button
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
12 Reviews
Click to filter by ratings:
5 stars
10
4 stars
1
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Quick service, flu shutdown and all....
    Got the parts, they worked perfectly. Thanks for providing the service you do. Always a pleasure ordering from your company.
    Guest - 6 days ago Verified Purchase
    correct part, easy to order, fast shipping
    Exactly what it was supposed to be
    Guest - March 9, 2020 Verified Purchase
    easy repair
    good
    Guest - November 15, 2019 Verified Purchase
    GREAT SERVICE
    Thank you for your prompt shipment. The part fit perfectly and the product arrived quickly!
    Guest - September 21, 2019 Verified Purchase
    Easy replacement
    Part is exact replacement, friendly staff. Came on time
    Guest - July 6, 2019 Verified Purchase
    A+++++
    A+++++
    Guest - July 1, 2019 Verified Purchase
    on off button
    ordered the part off the website real easy to navigate received in a couple days
    Guest - May 24, 2019 Verified Purchase
    Perfect part, easy to repair
    The switch button on my 7-1/2" Makita miter saw had come off and gotten lost. I ordered this as a replacement, and it arrived quickly, and popped right in with ease! Very happy with my purchase!
    Guest - May 17, 2019 Verified Purchase
    The product was as advertised
    Matched original equipment part
    Guest - May 6, 2019 Verified Purchase
    Saw repair
    I order this along with other parts to fix my saw. everything worked great.
    Guest - May 4, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    NEXT >
    Product Information
    Manufacturer: Makita
    Product Number: 411478-6
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Switch Button
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy