eReplacementParts.com
877-346-4814
Makita Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  Makita Parts  322317-4 Stopper Pin
photo thumbnailphoto thumbnail360 degree photo thumbnail

Stopper Pin

Part Number: 322317-4
Makita
Availability: 12 in stock
Price: $5.53
Order within the next 4 hours
and your part ships today!
Product Information
Manufacturer: Makita
Product Number: 322317-4
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a Genuine OEM sourced replacement part designed for use with Makita Compound Miter Saws. It connects to the Arm and it is used to lock the blade into the down position for storage or transportation. This item is made out of Metal and it is Sold Individually.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Miter Saw
  • • Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Stopper Pin - 322317-4
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
, Allen wrench,hammer,punch,vise,zip ties,swear words,patience
Stopper pin was sheared so saw could no be locked in down position
Remove the blade guard retaining screw
Remove allen set screw from saw frame
Drive out 3'' long retaining pin,separate blade housing from body of saw. At this point the large spring that tensions the blade pivot will go flying.
Installing the new stopper pin is easy.Re-installing the spring is a real struggle and the internet was of no help. After a few failed attempts I placed the spring in a vise secured it with a hd zip tie and removed it from the vise.
Now the fun part.You have to re-install the spring and at the same time re-install the retaining pin.I was able to do it by myself, but I strongly recommend the help of another person. Finally cut the zip tie and remove the pieces and you are done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Many parts were damaged or missing due to over 10 years of professional use.
Replaced the power cord and the work light. Replaced the pin that holds the saw in the closed position. Also replaced a few other misc parts. The light, power cord and pin were the biggest reasons I needed to repair just due to safety and ease of use. The pin was the hardest part to replace because I had to remove the large pivot pin that the entire saw hinges on by tapping it out with a mallet and a 1/2" socket extension. The spring that holds the saw in the up position comes out when the hinge pin is removed making it extremely difficult to put everything back together. I realized after the fact that there are holes just below the spring that you can insert a screw driver or Allen wrench or similar object which holds the spring in the closed position. I still haven't figured out if there is an easier way to replace the spring itself since you obviously can't hold it in the closed position if you are trying to replace it, but my spring is fine and I don't have to worry about that now. There were no websites or videos that I could find to show how this is done, but I figured it out. Would have been easier if there was something that explained the holes for holding the spring before I took it all apart and the spring ejected the saw arm.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Stopper Pin - 322317-4
Dust Bag Assembly - 122351-2
Repair Difficulty:
Expert
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Power Drill, Socket set, Adjustable Wrench, Rubber mallet, drive pin to match bore
Locking pin sheared
Removed main pivot bolt, drove out bushing with drive pin to match size, removed saw from cutting deck, removed broken pin, installed new pin with rubber o-ring that was not included had to buy that at a hardware store, positioned saw to deck by compressing spring and lining up bores, drove bushing back in and reinstalled main pivot bolt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • LOVE dealing with this company.
    Super fast and they have EVERYTHING!
    Guest - July 30, 2022 Verified Purchase
    Works well
    The part was a good replacement for a broken part. It arrived quickly as well.
    Guest - March 23, 2022 Verified Purchase
    Correct part Perfect fit and speedy delivery .
    Easy to find via schematic and very fast shipping .
    Guest - December 7, 2021 Verified Purchase
    A lot to take apart to change but all good
    All the parts I ordered fit perfect , Some parts are more involved to change out
    Guest - May 11, 2021 Verified Purchase
    Quick fix
    You always have the parts i need for my older tools ........THANKS
    Guest - March 18, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Makita
    Product Number: 322317-4
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal