866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Strainer

Part Number: 12312610631
ShindaiwaEcho
Availability: 1 in stock
Price: $3.99
Quantity:
Order within the next 9 hours
and your part ships today!

*This part replaces obsolete part #: 22100-81380, 12312603930, 70030-85431 and 70030-81380.

Description:
This is an original replacement part manufactured for use with outdoor power equipment. The strainer is used with many different types of equipment and is commonly used in the carburetor fuel system. This strainer is available as an individual replacement part, please see model diagram for part location and usage.
Product Information
Manufacturer: Shindaiwa, Echo
Product Number: 12312610631
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
Compatibility

This part is compatible with the following machines:

Shindaiwa
Echo

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Chain Saw
  • • Cultivator
  • • Edger
  • • Grass Trimmer
  • • Hedge Trimmer
  • • Multi-Tool
  • • Pruner
  • • Pump
  • • Saw
  • • Trimmer
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Chain Saw
Parts Used:
Diaphragm-Metering - 12314103930
Gasket-M. Diaphragm - 12314003930
Diaphragm-Fuel Pump - 12311203930
Gasket Fuel Pump - 12312503930
Tensioner - 43301403931
Adjusting Screw - 43301602830
Strainer - 12312610631
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, compressed air, carburetor cleaning solvent
Hard starting - would run very briefly and stop.
1: Remove air filter
2: Remove recoil starter assembly.
3: Loosen carburetor nuts
4: Disconnect throttle and choke linkage from carburetor
5: Unplug kill switch wiring
6: Remove carburetor from engine
7: Disassemble carburetor - note the location of low and high speed needles and tension springs
8: Pry out strainer from carburetor body
9: Soak metallic carburetor parts in carburetor cleaner.
10: Carefully scrape old gasket material from carburetor body, diaphragm and pump covers
11: Blow out all passages thoroughly and blow dry all parts.
12: Inspect tank and fuel line - clean
13: Reassemble carburetor with new strainer, pump and diaphragm
14: Install carburetor and reassemble saw in reverse order from disassembly.

Blade tensioner and adjuster were replaced at this time as well - had nothing to do with the starting problem.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 15901019830
Gasket-M. Diaphragm - 12314003930
Diaphragm-Fuel Pump - 12311215030
Gasket - 12312515030
Diaphragm-Metering - P003001850
Strainer - 12312610631
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Nutdriver
Carb needed rebuild and clean
I took the carb off and disassembled it then cleaned with carb cleaner and reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Strainer - ( 12312610631 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy