eReplacementParts.com
877-346-4814
Toro Parts
Repair Parts Home  Lawn Equipment Parts  Toro Parts  38019 Shroud-Engine
Grid squares measure 1x1 inch

Shroud-Engine

Part Number: 38019
TecumsehToroGenerac
Availability: 23 in stock
Price: $62.34
Order within the next 13 hours
and your part ships today!

*This part replaces obsolete part #: 37694.

Product Information
Manufacturer: Tecumseh, Toro, Generac
Product Number: 38019
Classification: Part
Weight: 2.33 lbs.
Shipping: Ships Worldwide
Description:
This is an original replacement part manufactured for use with walk-behind lawnmowers. The plastic engine shroud is used to cover and protect the motor. This shroud does not include the main decal and is sold as an individual replacement part.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Toro
Tecumseh
Generac
Expand the 76 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver
Replaced engine shroud and air filter
Shroud had been damaged so I removed the old broken one by removing 4 hex head bolts and installed new one. Air filter takes no tools, just twist slightly and the cover comes off, takes a few seconds.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
Cover-Cutout - 105-3004
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
My engine shroud was broken last season and just wanted it replaced. I had also been without a cover cutout for several years so wanted to replace it as the grass had a tendency to fly up from under
Simply unscrewed the old broken engine shroud and secured the new one. I did have to "unthread" the pull cord and "re-thread" it with the new cover but that was no problem. The cover cut-out simply snapped in place. All was easy. Thanks again for the quick and professional (and very courteous) service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver, Scissors Long nose pliers
Shroud nuts plastic holders broke
1. Unscrewed 4 nuts from broken part of the old shroud.
2. Pulled cord little to tie off.
3. Used long nose pliers to pullout tied nut from card holder.
4. Cut off nut and threaded cord thru shroud and cord guides. Tied off with another nut on
the cord holder.
5. Tightened 4 nuts holding shroud onto engine Don’t over tighten. DONE
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Cracked shroud
Removed handle from the starter rope.
Removed cracked shroud using deep well socket
(4 bolts)
Thread starter rope through hole in new shroud and reattached handle
Bolt new shroud down
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
V-Belt - 91-2258
Traction Cable - 105-1844
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set
Belt running the variable assist power was worn. Engine shroud was fractured, traction cable bent
removed the plastic shrouds for the best and drive components
removed the mower blade
removed the old belt and installed the new one
reattached the shrouds
attached the blade
installed the new traction cable
replaced the engine shroud
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Shroud-Engine - 38019
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Scissors
The old shroud was broken and exposed the muffler
Unbolted the old shroud and removed it.
Cut the starter rope
Cleaned off the engine, it was real dirty
Feed the started rip through the new shroud
Reinstalled the new shroud with four screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
0
4 stars
2
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Cracked shroud replaced
    The condition was great. At first it seemed not to fit, but it does. Fast response from eReplace. U tube videos helped too. Mower looks new again. Simple change out after video review.
    Stacy - April 30, 2019 Verified Purchase
    Cracked shroud replaced
    The condition was great. At first it seemed not to fit, but it does. Fast response from eReplace. U tube videos helped too. Mower looks new again. Simple change out after video review.
    Stacy - April 30, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Tecumseh, Toro, Generac
    Product Number: 38019
    Classification: Part
    Weight: 2.33 lbs.
    Shipping: Ships Worldwide

    Organize Your Home in a Snap!

    The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

    "Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away ... Very convenient. I'm impressed."
    ★★★★★ -Clever Jeff ★★★★★

    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal