This replacement bolt is supplied from original equipment manufacturer for use with handheld lawn and garden equipment. This is a standard hardware with multiple uses based on your unit. Please check diagrams for proper application. It is a hex socket head bolt which is sold individually. It needs a hex key/allen wrench for installation.
Troubleshooting
This part works with the following brands:
Shindaiwa
This part works with the following products:
Trimmer
Brush Cutter
Edger
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Head rusted out
New bolt worked with some anti-seize.
Tarael - February 15, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove Fuel tank Assembly (remove straps and hose)
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Pist
... Read moreon from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
Just make sure that all of your new parts are laid out separately, in order to allow you to keep everything separate from the old parts that you will be removing. Take your time, clean areas and parts that you will be keeping as you go. Once all parts have been removed and parts cleaned, work your way backwards from the way you removed pa
... Read morerts when installing the new parts. I use 90 degree type Allen Head wrenches without handles that way I do not over tighten fasteners. I had gasket material that stuck on me around the intake portal to the piston that needed to be scrapped off, so I brought the piston to TDC and stuffed a small bit of rag in the hole to keep debris from getting inside the head.
I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16535063
Manufacturer Part Number: V203000591
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
