It is an authentic component that is supplied by the original equipment manufacturer for use with Shindaiwa and Echo lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Keep in mind this high-quality hardware is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this bolt.
Troubleshooting
This part works with the following brands:
Shindaiwa
Echo
This part works with the following products:
Trimmer
Brush Cutter
Leaf Blower / Vacuum
Edger
Chainsaw
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Just make sure that all of your new parts are laid out separately, in order to allow you to keep everything separate from the old parts that you will be removing. Take your time, clean areas and parts that you will be keeping as you go. Once all parts have been removed and parts cleaned, work your way backwards from the way you removed pa
... Read morerts when installing the new parts. I use 90 degree type Allen Head wrenches without handles that way I do not over tighten fasteners. I had gasket material that stuck on me around the intake portal to the piston that needed to be scrapped off, so I brought the piston to TDC and stuffed a small bit of rag in the hole to keep debris from getting inside the head.
I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
Read less
Did you find this story helpful?
Thank you for voting!
Nut loosened on hedge trimmer bar securing blades.
Installed new bolt and tightened nut, Installed zip tie around end of bolt to help prevent nut from loosening under vibration allowing bolt to fall out of hedge trimmer blade guide. Zip tie was previously installed on end of bolt but after two years zip tie failed.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9246199
Manufacturer Part Number: V203000700
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
