Part Location Diagram of V475004880 Shindaiwa Tube
See part E-3 in the diagram
( Grid squares measure 1x1 inch )

Tube V475004880

Manufactured by:
Shindaiwa
ERP Number:
ERP9246334
Part Number:
V475004880
Original Equipment Manufacturer ?
$5.95
Special Order

Easy 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Shindaiwa replacement part. The tube is designed by the manufacturer for use in water pumps, brushcutters, and trimmers. This part is made of flexible rubber, and is used to house the electrical cord that carries electricity to the spark plug. You may require an Allen key and wrench when replacing this item. This part is sold individually.

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Brush Cutter

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bush cutter had weak compression, and, no spark

Frankie from Tamuning, Guam

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Remove Fuel tank Assembly (remove straps and hose)
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Pist on from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
Did you find this story helpful?
Thank you for voting!
  • 1