Part Location Diagram of V103001000 Shindaiwa Gasket
See part A-2 in the diagram
( Grid squares measure 1x1 inch )

Gasket V103001000

Manufactured by:
Shindaiwa
ERP Number:
ERP9235240
Part Number:
V103001000
Original Equipment Manufacturer ?
$5.95
Special Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Shindaiwa replacement part. The gasket is designed by the manufacturer for use in brushcutters and power blowers. This part is made of flexible plastic, and is used to seal the connection between the cylinder and the insulator. You may require an Allen wrench or hex key when replacing this item. This part is sold individually.

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Brush Cutter
  • Leaf Blower / Vacuum

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bush cutter had weak compression, and, no spark

Frankie from Tamuning, Guam

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Remove Fuel tank Assembly (remove straps and hose)
2. Remove Carburetor from cylinder (remove screws and gaskets, clean with Carburetor cleaner)
3. Disassemble and Remove the Cylinder from the Crankcase (remove screws and gaskets)
4. Remove Muffler from the Cylinder (remove cover plate and screws)
5. Remove Pist on from Crankcase (remove lock pins and bearing)
6. Remove Ignition Coil from Flywheel
Note: With the exception of the Ignition Coil and Muffler, I use carburetor cleaner to clean the cylinder and carburetor (internal/external)
7.Reverse the steps to reassemble- replacing the parts that are unserviceable with the new part(s).
Note: The gap between the ignition coil to the Flywheel is approx. one business card apart.
Did you find this story helpful?
Thank you for voting!
  • 1