Part Location Diagram of LB0012 Senco Seal
See part 85 in the diagram
( Grid squares measure 1x1 inch )

Seal LB0012

Manufactured by:
Senco
ERP Number:
ERP10074409
Part Number:
LB0012
Original Equipment Manufacturer ?
  Works with your model  SFN2-B!
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(7 rated repairs) ?
  Works with your model   SFN2-B!

Product Description

?

This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Customer Part Reviews

?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

dried out rubber

Steven from Scottsdale, Arizona

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
YJ0035, LB5046, LB0777, LB0030, LB0012
Senco SKS gun (mid 90\'). Remove four alan screws at the top of the cylinder and everything pulls straight out without any other tools. The old plastic piston is no longer made and the seal is no longer available for it. Since that was the main problem with the gun, I bought the new style aluminum piston. It slides right in. Lube all the rubber with silicone o-ring lube. Good as new again.
Did you find this story helpful?
Thank you for voting!

Did not fire

Larry from Cape Coral, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
LB5005, LB3224, LB0133, LB0034, LB0024, LB0012
Installed all the new seals I ordered. The nylon seal needed to be heated up so it would streach. I put it in a dish of water and microwaved it for one minute on high, that made it just flexible enough to get it on to the piston top.
Did you find this story helpful?
Thank you for voting!

Would not fire a staple

Fred from Laguna Hills, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
YJ0035, LB5046, LB0777, LB0030, LB0012
Replaced the worn o rings and the redesigned firing cilinder ,cleaned and lubed all parts and put back together . Works as good as new.
Very pleased with results .
Did you find this story helpful?
Thank you for voting!

would not drive nail

steven from SAN DIMAS, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
LB0012
put in new seals
Did you find this story helpful?
Thank you for voting!

Leaks air

Edward from Fife, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
LB3505, LB0024, LB0012
Replaced the worn seals.
Did you find this story helpful?
Thank you for voting!

Replaced seals pins and retrofit kit

alfred from chesapeake, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Removed the screws holding the cap on.
Removed the driver
Removed the old cylinder
Installed the seal and other parts listed
Cleaned the gun through out and oiled it
Put it back together
Replaced the cap
Shoots like a new nail gun
Did you find this story helpful?
Thank you for voting!

Plunger not retracting

Max from Shingletown, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
YJ0035, LB5046, LB0777, LB0030, LB0012
Removed the top cap assembly
Removed the piston and driver
Tapped on the housing with a mallet, with the stapler upside down to release the cylinder.
Installed the new cylinder
Installed all of the other seals and o-rings
Place the top cap on.
Shoots like it\'s new
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10074409
Manufacturer Part Number: LB0012
Brand Model Number Description
Senco AST-4 Nailer - Stapler
Senco FINISHPRO30XP Nailer - Senco Finishpro30xp-(9p0002n) Parts
Senco LS1XP Nailer - Air Nailer
Senco SCN60 Nailer - Air Nailer
Senco SCN60XP Nailer - Coil Nailer
Senco SCN60XPFRH Nailer - Scn60 Coil Nailer, Contact Actuation
Senco SCN63LDXP Nailer - Air Nailer
Senco SCN65XP Nailer - Coil Nailer
Senco SCN65XPFRH Nailer - 3-1/2 Inch Rugged-Duty Coil Nailer
Senco SFN1 Nailer - Nailer
Senco SFN1+ Nailer - Nailer
Senco SFN2 Nailer - Finish Nailer
Senco SFN2-B Nailer - Senco Sfn2-B-(180004n) Parts
Senco SFN2C Nailer - Air Nailer
Senco SFN30 Nailer - 15 Ga. Finish Nailer
Senco SFN3015Ga Nailer - Sfn30 15 Gauge Finish Nailer
Senco SFN40 Nailer - 15 Ga. Finish Nailer
Senco SJ10 Nailer - Fine Wire Stapler
Senco SJS Nailer - Fine Wire Stapler
Senco SKS Nailer - Stapler
Senco SKS18 Nailer - 18 Gauge Stapler (Sks)
Senco SKSXP Nailer - Medium Wire Stapler
Senco SLP20 Nailer - Air Nailer
Senco SLP20XP Nailer - 18 Ga. Brad Nailer
Senco SLP20XP18Ga Nailer - Slp20xp 18 Ga Brad Nailer W/ Case
Senco SLS20 Nailer - SencoMatic Stapler
Senco SLS20XP Nailer - 18 Ga. Finish Stapler
Senco SLS20XP-HF Nailer - Senco Sls20xp-Hf-(490021n) Parts
Senco SLS20XP-K Nailer - Senco Sls20xp-K-(490101n) Parts
Senco SLS20XP-L Nailer - Senco Sls20xp-L-(490105n) Parts