This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Got the parts I needed tbey fit perfectly and great customer service
Nail gun is now fixed and ready to work.
Guest - November 27, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Part fix as it should.
Guest - February 16, 2022
Verified Purchase
★★★★★
★★★★★
Parts worked great. Problem solved.
Parts worked great. Problem solved. Quick delivery
Steven - December 2, 2023
Verified Purchase
★★★★★
★★★★★
Senco SJS Air Stapler seals
Ordered all the seals I could find, including the ones suggested to stop air leak, didn't solve the problem. Guessing the unavailable seals are the ones I need.
Guest - October 17, 2022
Verified Purchase
October 17, 2022
Hi David,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Senco SKS gun (mid 90\'). Remove four alan screws at the top of the cylinder and everything pulls straight out without any other tools. The old plastic piston is no longer made and the seal is no longer available for it. Since that was the main problem with the gun, I bought the new style aluminum piston. It slides right in. Lube all the
... Read morerubber with silicone o-ring lube. Good as new again.
Installed all the new seals I ordered. The nylon seal needed to be heated up so it would streach. I put it in a dish of water and microwaved it for one minute on high, that made it just flexible enough to get it on to the piston top.
Replaced the worn o rings and the redesigned firing cilinder ,cleaned and lubed all parts and put back together . Works as good as new.
Very pleased with results .
Removed the screws holding the cap on.
Removed the driver
Removed the old cylinder
Installed the seal and other parts listed
Cleaned the gun through out and oiled it
Put it back together
Replaced the cap
Shoots like a new nail gun
Removed the top cap assembly
Removed the piston and driver
Tapped on the housing with a mallet, with the stapler upside down to release the cylinder.
Installed the new cylinder
Installed all of the other seals and o-rings
Place the top cap on.
Shoots like it\'s new
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/nailer/seals-and-gaskets/"},{"position":3,"name":"LB0012","title":"LB0012","url":""}]
