Part Location Diagram of 532138971 Husqvarna Lawn Mower High Lift Blade
See part I-11 in the diagram
( Grid squares measure 1x1 inch )

Lawn Mower High Lift Blade 532138971

Manufactured by:
Husqvarna
ERP Number:
ERP9286056
Part Number:
532138971
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(27 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Poulan
  • Jonsered
  • Craftsman
  • Ariens
  • Weed Eater
  • Murray
  • American Yard Products
  • RedMax
  • Ryobi
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
Part# 532138971 replaces these:
  • 532127843
  • 532138498
  • 532138971

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(41 Reviews)
Click to filter by ratings:
  • 5 stars
    38
  • 4 stars
    3
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I have a bagger with three 18" blades, how can I order them? I need HY-LIFT blades. Thank you
Enrique For model number YTH180 - June 19, 2022

Hello Enrique, thank you for writing. The blade that we found for model YTH180 is 532138971. There was not an 18" blade in the listing. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

eReplacementParts Team
June 19, 2022

Did this question help you?
Thank you for voting!
Does this craftsman use 2 identical blades, or does it use 1 regular blade and a mulching blade?
Gloria For model number 917276817 - April 26, 2023

Hi Gloria, Thank you for writing. This model takes two High Lift Blades, Part Number: 532138971 or two Mulching Blades Part Number: 532139775. We hope this helps!

eReplacementParts Team
April 26, 2023

Did this question help you?
Thank you for voting!
i need the blades for this model
Jerry For model number 960460077 - April 14, 2022

Hello Jerry, thank you for your question. We have researched the model you have provided, and we would suggest the Hi-Lift Blade, part number 532138971. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
April 14, 2022

Did this question help you?
Thank you for voting!
will this part work on my Husqvarna LTH1542. 42"deck. Do the blades need to be changed from mulching to a stronger exhaust.
Jim Cobb For model number LTH1542 - March 24, 2022

Hello Jim, thank you for your question. While the baggers manufactured for Craftsman are interchangeable with Husqvarna machines, the parts that fit Husqvarna vary according to the deck size. A Husqvarna with a 48-inch deck requires a bagger manufactured to fit tractors or mowers with the same size deck. Yes, part 960730004 will fit. The Hi Lift Blade 532138971 is the best for baggers. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

eReplacementParts Team
March 24, 2022

Did this question help you?
Thank you for voting!
Looking for replacement blade for this mower
Steve For model number HDK 19H42 - September 1, 2022

Hi Steve, Thank you for your question. The part number listed under your model number for the mulching blade is 532134149. The part number listed for the high-lift blade is 532138971. The part number listed for the premium mulching blade is 532139775. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
September 1, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(27 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken mandrel assembly

Clyde from Dos Palos, California

20 of 20 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
584953901, 532138971, 532130794
Remove blade assembly. Remove deck, Remove the nut from the mandrel shaft above the mandrel pulley. Remove the pulley. Remove the the bolts holding the mandrel. Then remove the old mandrel. Line up the new mandrel assembly with the mandrel stripper and the holes in the deck. The mandrel assembly bolt holes are not threaded , but the the t hree mandrel screws are self tapping screws. Tighten the mandrel assembly to the deck, attach the washer pulley and the mandrel nut. Attach deck to mower and install the new blade.
Did you find this story helpful?
Thank you for voting!

Riding mower belts broke on mower deck and under carriage

danielle from Spring Hill, Tennessee

14 of 14 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
1. Watched you tubes videos for each part of project (never did this before)
2. Detached entire mower deck assembly by removing all cotter pins.
3. Reinstalled v-belt and v-belt, mower secondary
4. Replaced both blades and cleaned underside of mower deck
5. Replaced filter and spark plug
6. Reassembled m ower deck by reattaching cotter pins in same order as they were taken off

Hardest part was maneuvering v-cables back in proper alignment and removing mower deck. Kind of heavy for one person.

Did you find this story helpful?
Thank you for voting!

Replaced belts, blades and mandrel assembly on riding lawn tractor

Wayne from Kennewick, Washington

12 of 12 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Simple repair for the average diy\'er. Pull the pins and drop the mower deck, then slide out from under mower. Remove the old, damaged blades, remove and replace the mandrel assembly (3 bolts for the belt shield and 3 bolts on the mandrel), install new blades, put the new belt on, then place deck back under the tractor and reattach. You\' re good to go.
Did you find this story helpful?
Thank you for voting!

Needed new blades

James from Collegeville, Pennsylvania

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532138971
Lift the front of the mower and place jacks underneath it and block the rear wheels. Remove the battery cables. Remove the blade bolt and both washers. Then remove the old blades and install the new blades, and place the washers on the spindle and tighten the blade bolts. Attach the battery cables. And lower the mower. Time to cut the law n now.
Did you find this story helpful?
Thank you for voting!

Tractor mower blade needed to be replaced

Raymond from Cedar Hill, Texas

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532138971
1. Removed blade housing for access
2. Removed old blades
3. Installed new blades
4. Replaced blade housing
Did you find this story helpful?
Thank you for voting!

Damaged parts

joel from templeton, California

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set, Wrench (Adjustable), Wrench set
Removed the deck and replaced parts.
Did you find this story helpful?
Thank you for voting!

Blade worn

Steve from Forest, Virginia

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
532138971
Removed old blades. Installed new blades.
Did you find this story helpful?
Thank you for voting!

Changed cutting blades on tractor.

william from greenwich, Connecticut

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Parts Used:
532138971
1. Raised the front of the tractor.
2. Raised the cutting height to the maximum position.
3. Removed the blade.
4. Installed the new blade.
Did you find this story helpful?
Thank you for voting!

Bent blade that caused vibration.

William from Eden Prairie, Minnesota

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532138971
Used a socket wrench to remove both blades and to install the new blades.
Did you find this story helpful?
Thank you for voting!

Factory installed defective blades

Suzelle from Lake Wales , Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
532138971
1. Jacked up front with lift.
2. Removed old blades with air wrench
3. Installed new blades with air wrench.

Process took less than 10 minutes.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP9286056
Manufacturer Part Number: 532138971
Brand Model Number Description
Husqvarna 130 Lawn Tractor - Ride Mower
Husqvarna 1342 Lawn Tractor - Ride Mower
Husqvarna 1342A Lawn Tractor - Ride Mower
Husqvarna 1342B Lawn Tractor - Ride Mower
Husqvarna 1342C Lawn Tractor - Ride Mower
Husqvarna 1342XPA Lawn Tractor - Ride Mower
Husqvarna 1452XPA Lawn Tractor - Ride Mower
Husqvarna 1542 Lawn Tractor - Ride Mower
Husqvarna 1542A Lawn Tractor - Ride Mower
Husqvarna 1542B Lawn Tractor - Ride Mower
Husqvarna 1542C Lawn Tractor - Ride Mower
Husqvarna 1542D Lawn Tractor - Ride Mower
Husqvarna 1542E Lawn Tractor - Ride Mower
Husqvarna 1542XP Lawn Tractor - (T) (96043000602) (2006-10) Ride Mower
Husqvarna 1542XPB Lawn Tractor - Ride Mower
Husqvarna 1542XPC Lawn Tractor - Ride Mower
Husqvarna 1542XPD Lawn Tractor - Ride Mower
Husqvarna 1542XPE Lawn Tractor - Ride Mower
Husqvarna 1542XPF Lawn Tractor - Ride Mower
Husqvarna 1542XPG Lawn Tractor - Ride Mower
Husqvarna 1542XPT Lawn Tractor - Ride Mower
Husqvarna 1742A Lawn Tractor - Ride Mower
Husqvarna 1742B Lawn Tractor - Ride Mower
Husqvarna 1742C Lawn Tractor - Ride Mower
Husqvarna 1742D Lawn Tractor - Ride Mower
Husqvarna 1842 Lawn Tractor - Ride Mower
Husqvarna 1842A Lawn Tractor - Ride Mower
Husqvarna 1842B Lawn Tractor - Ride Mower
Husqvarna 1842C Lawn Tractor - Ride Mower
Husqvarna 18542 Lawn Tractor - Ride Mower