Part Location Diagram of 532140294 Husqvarna Ground Drive V-belt
See part E-57 in the diagram
( Grid squares measure 1x1 inch )

Ground Drive V-belt 532140294

Manufactured by:
Husqvarna
ERP Number:
ERP9011141
Part Number:
532140294
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(15 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine manufacturer approved replacement part belt for the ground drive. It is commonly used with riding lawn mowers/tractors. This is the ground drive belt that connects the engine crankshaft pulley to the transmission pulley. Over time belts tend to wear and and stretch requiring replacement. It is always a good idea to clean the pulleys off before installing the new belt to ensure top performance and longevity with the new belt. This rubber belt is sold individually. To complete this repair you will need a wrench and a screwdriver.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Craftsman
  • Poulan
  • Weed Eater
  • Ryobi
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
Part# 532140294 replaces these:
5310060-42, 531006042, 531013140, 532140294,

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
  • 5 stars
    12
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    1
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I am looking at replacing the drive belt on my Husqvarna 48 inch deck. The number I have, from the manual is 532 14 02-94. if this will replace my drive belt will be ordering it from you.
Craig For model number 96013000301 - March 19, 2022

Hello Craig, thank you for writing. Yes, the Number 532140294 you had chosen is compatible with your model. This is the ground drive belt that connects the engine crankshaft pulley to the transmission pulley. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

eReplacementParts Team
March 19, 2022

Did this question help you?
Thank you for voting!
I need a belt to replace worn one on model # 917.256552
Deana For model number 917.256552 - May 17, 2023

Hi Deana, Thank you for your question. The part number for the ground drive belt that connects the engine crankshaft pulley to the transmission pulley is 532140294. The part number for the belt that drives the blades is 532144200. We hope this helps!

eReplacementParts Team
May 17, 2023

Did this question help you?
Thank you for voting!
I have a Husqvara ridding mower. Have to replace the deck belt. Got the one it called for. But put it on & it is to long. Is there another size belt or is there a adjustment some where.
Harold For model number YTH18542 - May 11, 2022

Hi Harold, Thank you for your question. There are 2 belts listed for your riding mower. The part number listed under your model number for the ground drive belt is 532140294. The ground drive belt connects the engine crankshaft pulley to the transmission pulley. The part number listed for the deck belt is 532174883. This is the main deck belt that will drive the pulleys that spin the blades. If you need help placing an order for one of these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
May 11, 2022

Did this question help you?
Thank you for voting!
How to replace ground drive belt on 42 inch mower deck?
Johnny For model number 8067860091 - October 1, 2022

Hello Johnny, thank you for your question. While we do not have a video for your model 917271080 and part 532140294, we do have a testimonial from a previous customer that documented how he did it. " Lifted front of mower, removed deck, set parking brake, removed two belt guides at engagement clutch, disconnected blade engagement switch, removed belt reversed sequence and installed new belt." We hope this helps.

eReplacementParts Team
October 1, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(15 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Drive bely worn, torsion spring on shifter broken

Dave from Orange City, Florida

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set
Parts Used:
532165711, 532140294
Removed cutting deck. Removed old drive belt. Put new belt on. Removed shifter and broken spring, put new spring on replace shifter
Did you find this story helpful?
Thank you for voting!

Ground drive belt broke

Grant from Jerome, Idaho

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
532140294
1 Remove mower deck. 2 Put on new ground drive belt 3 Put mower deck back on
Did you find this story helpful?
Thank you for voting!

Mower deck belt worn out.

David from Creedmoor, North Carolina

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
532174883, 532140294
1. Removed the mower deck by pulling cotter pins, and slid out from under the mower on a blanket.
2. Cleaned under the deck with a wire brush.
3. Removed the drive belt, which involved disconnecting the clutch wire harness and the clutch locator.
4. Replaced the drive belt, testing belt for free movement.
5. Replac ed the mower deck, fitting the mower deck belt around the clutch pulley.
6. Tested the mower deck belt for free movement.
7. Reconnected the clutch wire harness and the clutch locator.
8. Started the mower to test both belts.
Did you find this story helpful?
Thank you for voting!

Needed to replace deck belts and the primary drive belt.

Scott from Iron River, Wisconsin

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
532176066, 532174368, 532140294
Nose roller was easy! Just needed to remove two bolts for the two brackets that held the roller in place. Belts were a breeze after dropping the deck.
Can\'t thank Ereplacement parts enough for making it so easy to buy the parts I needed.
Did you find this story helpful?
Thank you for voting!

The deck idler pulley had disintegrated and prevented the drive belt from working properly

Frank from WINDER, Georgia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
532139245, 532140294
Lifted the front of the tractor up on cinder blocks and removed the mower deck per the owners manual instructions. Removed the deck idler pulley and then the drive belt. Reinstalled the drive belt and then installed the idler pulley ensuring the drive belt was properly installed. Next, reinstalled the mower deck and adjusted the side to s ide and the front to back adjustments per the owners manual. Then it was back to mowing the yard!
Did you find this story helpful?
Thank you for voting!

Drive belt stretched and slipping.

Delmas from RED HOUSE, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
532140294
Remove mower deck. Remove steering shaft. Remove motor pulley and mower clutch assembly. Remove old belt. Install in reverse order.
Did you find this story helpful?
Thank you for voting!

Belt worn

Brian from PITTSBURGH, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532140294
Removed mower deck
Did you find this story helpful?
Thank you for voting!

Drive belt

Michael from dendron, Virginia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Parts Used:
532140294
Removed old Dtive Belt
Replaced with new
Did you find this story helpful?
Thank you for voting!

Belts needed replacing and guard was broken.

Anthony from Clinton township, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
532140088, 532140294, 532144200
1. Lower deck 2. Remove guard and belt 3. Install belt 4. Replace guard
Did you find this story helpful?
Thank you for voting!

8 year service on lawn tractor

George from WARREN, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
532144959, 532140294
removed mowing deck
cleaned and painted deck
removed fan on transmission to replace drive belt
replaced drive belt
replaced ground drive belt
replaced mower deck
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9011141
Manufacturer Part Number: 532140294
Brand Model Number Description
Husqvarna 130 Lawn Tractor - Ride Mower
Husqvarna 1342 Lawn Tractor - Ride Mower
Husqvarna 1342A Lawn Tractor - Ride Mower
Husqvarna 1342B Lawn Tractor - Ride Mower
Husqvarna 1342C Lawn Tractor - Ride Mower
Husqvarna 1342XPA Lawn Tractor - Ride Mower
Husqvarna 140 Lawn Tractor - Ride Mower
Husqvarna 145 Lawn Tractor - Ride Mower
Husqvarna 1452XPA Lawn Tractor - Ride Mower
Husqvarna 150 Lawn Tractor - Ride Mower
Husqvarna 1542 Lawn Tractor - Ride Mower
Husqvarna 1542A Lawn Tractor - Ride Mower
Husqvarna 1542B Lawn Tractor - Ride Mower
Husqvarna 1542C Lawn Tractor - Ride Mower
Husqvarna 1542D Lawn Tractor - Ride Mower
Husqvarna 1542E Lawn Tractor - Ride Mower
Husqvarna 1542XP Lawn Tractor - Ride Mower
Husqvarna 1542XPB Lawn Tractor - Ride Mower
Husqvarna 1542XPC Lawn Tractor - Ride Mower
Husqvarna 1542XPD Lawn Tractor - Ride Mower
Husqvarna 1542XPE Lawn Tractor - Ride Mower
Husqvarna 1542XPF Lawn Tractor - Ride Mower
Husqvarna 1542XPG Lawn Tractor - Ride Mower
Husqvarna 160 Lawn Tractor - Ride Mower
Husqvarna 1742A Lawn Tractor - Ride Mower
Husqvarna 1742B Lawn Tractor - Ride Mower
Husqvarna 1742C Lawn Tractor - Ride Mower
Husqvarna 1742D Lawn Tractor - Ride Mower
Husqvarna 1746 Lawn Tractor - Ride Mower
Husqvarna 1746A Lawn Tractor - Ride Mower