Medium
15-30 minutes
It is a genuine OEM sourced item that is specially produced for use with Toro lawn and garden equipment. This special replacement nut has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams for correct location and use of this hardware. It is a durable metal speed-nut which is sold individually.
Nut-speed 3290-337
OEM part for: Toro
Part Number: 3290-337
$3.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Nut-speed will fit the following 232 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 3290-259
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
I have used this site many time with great satisfaction ordering many parts over the year
fit perfact
Dan -
August 8, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Nut-speed
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blade cable brake
Robert - May 17, 2023
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
Removed blade & blade clutch cover ran new cable like old one made 1 adjustment
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lawn mower brake cable broke.
ALBERTO - April 29, 2022
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Power socket⁴
Parts Used
First removed all 5 bolts that secure front cover. 10mm socket needed. Removed cover. Cut all cable ties from handle bar. Remove old broken cable. Installed new cable and secure with cable ties.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
It was missing
Samuel - February 3, 2022
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Added a new speed nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bent rod and rusty spring
Richard - October 27, 2021
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Vise grips
Took the old and spring out and put new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade brake cable broke
George - May 22, 2021
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Ruler
I didn't want a mess, so I removed fuel tank and drained oil, oil was old anyway
2- remove cover under deck by taking 2 bolts from top of deck
3- measure the space between mounting clamp and end of cable so you can put it approximately where it belongs.
4- remove old cable you will have to measure the distance at the top of the mower handle and the loosen bolt enough to get cable out of top clamp, you will turn plastic end of cable to release from mower handle
5- replace in same order, put top end on the feed cable back through hole in deck
Note: pay attention to routing of cable under the deck especially because you don't want to kink it or have it rubbing on belts or pulley, Photos with the smart phone before you tear it down will be helpful later...
2- remove cover under deck by taking 2 bolts from top of deck
3- measure the space between mounting clamp and end of cable so you can put it approximately where it belongs.
4- remove old cable you will have to measure the distance at the top of the mower handle and the loosen bolt enough to get cable out of top clamp, you will turn plastic end of cable to release from mower handle
5- replace in same order, put top end on the feed cable back through hole in deck
Note: pay attention to routing of cable under the deck especially because you don't want to kink it or have it rubbing on belts or pulley, Photos with the smart phone before you tear it down will be helpful later...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
