866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Lawn Equipment Parts  Husqvarna Parts  532435110 Manual Clutch Cable With Spring

Manual Clutch Cable With Spring

Part Number: 532435110
Husqvarna
Availability: 25+ in stock
Price: $26.21
Quantity:
Order within the next 7 hours
and your part ships today!

*This part replaces obsolete part #: 5923435110 and 532408319.

Description:
Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck.

You may need pliers to complete this repair.

• First you want to see where the old cable is attached
• Just remove the cable end there and install the new one
• Now you can run the new cable up to the control handle
• Then just as the old cable, put the z-shaped end through the hole in the control handle
• Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Product Information
Manufacturer: Husqvarna
Product Number: 532435110
Classification: Part
Weight: 0.60 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
  • • Lawn Tractor
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
13 of 17 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Replaced mower engagement cable.
Remove fuel tank and replace cable from mower deck to engagement handle. Replace fuel tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 9 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The blade engage cable broke
Remove old cable by depressing clips and removing spring. Reinstall new cable and reattach spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Push Nut - 532110452
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Broken Cable
Removed the old cable and spring and replaced with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Hands
Blade would not engage
Removed old cable and replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 594892801
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set, Flash light
Worn cable / worn blades
For the cable I made notes on how the old one was installed, then installed the new one. For the blades I used a glove on one hand to hold the blades, then removed the bolts holding the blades. Then just placed the new blades on the spindles and tightened the bolts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
My blade engagement cable broke and would not turn the blades off
I had to remove the fuel tank, then take off cable end from engagement lever and installed the new cable to it. Then hooked the other end of the cable to the mower deck
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Manual blade clutch cable on lawn tractor broke, first non OEM replacement cable failed.
On a Husqvarna YTH22V46 lawn Tractor:
Removed tractor hood
Removed fuel tank and set on engine
Removed manual blade clutch engagement lever assembly from inside dash
Removed old cable from lever assembly
Detatched mower deck, slid out from under tractor and removed old cable
Attached new cable to mower deck and reversed previous steps up to re-installing fuel tank
NOTE: Replacement cable should easily attach to lever assembly. If you need to "stretch" the cable to install it is not the proper cable. (not an issue if you bought from eReplacmentParts.com) Important to test movement of lever at this point to ensure free movement and engagement with no binding.

Replaced fuel tank and tractor hood.
Cut lawn
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Clutch cable spring to deck broke.
Took off gas tank and replaced part. Reinstalled gas tank. Mowed the grass!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
The cable that places the blades in use was broken
Remove fuel tank

Remove top part of cable from behind fuel tank

Remove end of cable from mower deck
Then replace new cable where old cable was
Replace fuel tank
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Manual Clutch Cable With Spring - 532435110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Cable to engage blades broke
I looked to see how the old cable was installed, took a few pictures, then installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Manual Clutch Cable With Spring - ( 532435110 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
4.3
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • fit great
    Fast shipping just list the stock part
    Guest - 8 days ago Verified Purchase
    Recieved part in short order
    Part was the right one & fit right, mower working as it should. Thanks for the quick service.
    Guest - April 29, 2019 Verified Purchase
    Easy Repair
    The part was exactly what I needed, but I ordered two because the spring brakes.
    Guest - 24 days ago Verified Purchase
    eReplacementParts Team
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy