Easy
30-60 minutes
This is a replacement part designed for use with Char-Broil grills. Burners distribute gas to create an even flame across the cooking area. It is made out of stainless steel and it is sold individually. Features a built-in spider guard protection. Please note electrode is sold separately.
No tools needed to replace this burner.
• Make sure the gas tank is disconnected
• Remove burner from the valve
• Install the new burner
• Re-connect the gas and test the grill
Main Burner Tube, No Electrode G430-3800-W2
OEM part for: Char-Broil
Part Number: G430-3800-W2
$15.08
In Stock
Order within the next 6 hours and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.38 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 5 machines
Char-Broil
464220110 4 Burner Gas Grill with Side Burner View Diagrams & Manuals
464310209 3 Burner Gas Grill View Diagrams & Manuals
464311009 3 Burner Grill View Diagrams & Manuals
464324009 3 Burner Gas Grill View Diagrams & Manuals
415.16537900 3-Burner Lp Gas Grill With Side Burner View Diagrams & Manuals
This item works with the following types of products:
This part replaces obsolete part #: G430-3800-W1, 80018369
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Main Burner Tube, No Electrode
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Burners and carryover tubes rusted
Louis - July 5, 2019
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Locking pliers
I had to drill out rusted retaining screws on burners and then replaced parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced the worn out parts
Mark - June 1, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Unscrewed the old parts, cleaned the grill. Then installed the new parts in reverse order of the old parts without a problem. And placed the heat diffusers in by hand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The burners, diffusers and carryover tubes had rusted out.
Brent - March 16, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
I took out the old parts. The burners were the hardest to remove because the screws were rusted. I had to drill them out. Otherwise it went together very well. It was also tricky trying to plug in the new electrode, but I eventually got it. All the parts were exactly the same as the original at half the price as other stores or businesses!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Many parts were rusted out. Burner leaked gas. Carryover tubes completely inoperative. Diffusers rusted into pieces.
MATTHEW - July 14, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1. Removed Grill and Heat Diffusers. Replaced Heat shield (two easy screws).
2. Used pliers to remove rusted carryover tube screws (most time consuming)
3. Replaced burner and installed carryover tubes (just a few screws).
4. Installed new Heat Diffusers (set them in) and put grill back.
2. Used pliers to remove rusted carryover tube screws (most time consuming)
3. Replaced burner and installed carryover tubes (just a few screws).
4. Installed new Heat Diffusers (set them in) and put grill back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
