Easy
15-30 minutes
This heat diffuser is a genuine Char-Broil replacement part. It is made specifically for the Char-Broil 4 Burner Gas Grill with Side Burner. This part is designed to reduce fire flare-ups caused by grease drippings from food. It is made of metal and sold individually. Wearing work gloves during the installation of this part is recommended.
Heat Diffuser G550-0006-W1
OEM part for: Char-Broil
Part Number: G550-0006-W1
$13.82
In Stock
Order within the next 12 hours and your part ships today! 
Compatibility
This part will fit the following 1 machine
Char-Broil
464220110 4 Burner Gas Grill with Side Burner View Diagrams & Manuals
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Heat Diffuser
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Many parts were rusted out. Burner leaked gas. Carryover tubes completely inoperative. Diffusers rusted into pieces.
MATTHEW - July 14, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
1. Removed Grill and Heat Diffusers. Replaced Heat shield (two easy screws).
2. Used pliers to remove rusted carryover tube screws (most time consuming)
3. Replaced burner and installed carryover tubes (just a few screws).
4. Installed new Heat Diffusers (set them in) and put grill back.
2. Used pliers to remove rusted carryover tube screws (most time consuming)
3. Replaced burner and installed carryover tubes (just a few screws).
4. Installed new Heat Diffusers (set them in) and put grill back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat diffusers were rusted
Scott - June 28, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
Parts Used
Removed grill grates and replaced heat diffusers.(no tools needed) Also cleaned the entire insides of grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original heat diffusers had deteriorated
Jessica - April 27, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
1. Removed old diffusers
2. Replaced with new diffusers, which fit into pre-made holes in grill
2. Replaced with new diffusers, which fit into pre-made holes in grill
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts on grill were rusting out and some of the screws were hard to get out.
Gary - July 17, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver
1. Laid out all the parts and got the tools.
2. Took everything apart
3. Hooked the tubes up to the burners
4. Replaced the heat diffusers
5. Replaced the heat tent
6. Replaced the grease tray and pan
7. Tried grill to make sure everything worked
2. Took everything apart
3. Hooked the tubes up to the burners
4. Replaced the heat diffusers
5. Replaced the heat tent
6. Replaced the grease tray and pan
7. Tried grill to make sure everything worked
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carryover tubes rusted thru
Michael - March 21, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Power Drill
Quick fix..had to drill out one of the screws on a crossover. the parts fit perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The burners, diffusers and carryover tubes had rusted out.
Brent - March 16, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
I took out the old parts. The burners were the hardest to remove because the screws were rusted. I had to drill them out. Otherwise it went together very well. It was also tricky trying to plug in the new electrode, but I eventually got it. All the parts were exactly the same as the original at half the price as other stores or businesses!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
