This is a genuine Char-Broil replacement part, it is sold individually.
This is the part of the Grill that the flame is coming from on your Gas Grill.
Depending on your grill you may have 3 or 4 of these.
To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided.
The front of the burner will connect to the Electrode W/ Wire/Collector.
They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled.
Main Burner Tube, No Electrode G431-0300-W2A
OEM part for: Char-Broil
Part Number: G431-0300-W2A
Jump To:
Product Description ?
- 14-3/8- inch
- Classification: Part
- Weight: 0.39 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 31 machines
Char-Broil
This item works with the following types of products:
- Range Parts
- Outdoor Grill Parts
This part replaces obsolete part #: 80009027, G431-0300-W1A, G432-1700-W1, 80012284, 80009947, G431-0300-W2, G431-0300-W1
Repair Videos ?
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Main Burner Tube, No Electrode
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Burners and carry over tubes were rusted.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, Wire brush
All the old parts were rusted out.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Burners and heat tents rusted
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
2. Removed the entire units.
3. Replaced the main and crossovers with the new screws provided. (Lots of extra screws).
4 Put on new heat shields.
5 Scraped the grills with a painting knife, cleaned them with high pressure cleaner and put them back.
6 Turned it on, first time worked well. Let it burn for 15 minutes.
All done.
Parts we're all rotted out
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set, Power grinder
Parts were just rusted out.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Rusted burners
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill
Heat tents and burners were rusting out from excessive use
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Power Drill, Angle Grinder
All parts were correct. Fixed.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Burner tubes, heat tents, carryover tubes corroded.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Vice grip
Main burners were rusty and falling apart. Big yellow flame and unsafe. The ignition module didn't work. The heat tents were rusted and burned out.
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.