Easy
Less than 15 minutes
This is an authentic Hitachi replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The durable plastic cover attaches to the magazine. This item is used to encase the nails within the magazine. This part is priced as a single item.
Magazine Cover 885901
OEM part for: Metabo HPT (Hitachi)
Part Number: 885901
$10.55
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Metabo HPT (Hitachi)
NT50AE2 2" 18-Gauge Brad Nailer View Diagrams & Manuals
NT50AE2(S) Brad Nailer View Diagrams & Manuals
This item works with the following types of products:
- Nailer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Magazine Cover
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The nail magazine broke a small piece of the track. This allowed the nail feeder to slide out of the magazine. The spring then comically shot the parts across the room.
Jason - February 3, 2021
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
1 remove magazine from nailer
2 removed socket head cap screw from retainer
3 slid new sprin into the new magazine
4 slid new nail plate onto spring with the connector
5 while holding nail plate back replaced retainer on magazine
6 tested spring and feeder
7 shot some nails
2 removed socket head cap screw from retainer
3 slid new sprin into the new magazine
4 slid new nail plate onto spring with the connector
5 while holding nail plate back replaced retainer on magazine
6 tested spring and feeder
7 shot some nails
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Feeder was slipping past nails causing it to get wedged and not feed nails.
Phil - August 20, 2019
Tool Type
Nailer
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
, 5mm Allen wrench
Parts Used
Removed one 5mm allen screw to free the magazine.
Pulled magazine free making sure to hold on to the feeder spring.
Used 1/8 inch diameter punch to remove keeper pin from spring loaded latch attached to the worn magazine cover.
Installed old latch and spring onto new magazine cover.
Transferred old nail feeder spring into new magazine cover with new feeder.
Reinstalled onto gun body.
Pulled magazine free making sure to hold on to the feeder spring.
Used 1/8 inch diameter punch to remove keeper pin from spring loaded latch attached to the worn magazine cover.
Installed old latch and spring onto new magazine cover.
Transferred old nail feeder spring into new magazine cover with new feeder.
Reinstalled onto gun body.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plastic edge guides on magazine cover were broken.
John - February 16, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, drift punch, allen wrenches
Parts Used
Remove magazine cover stop/retainer with allen wrench. Slide out cover, remove follower and spring. Use drift punch to remove roll pin on magazine catch, remove catch and spring under it. Install on new magazine cover, install spring and follower, slide cover into magazine and re install cover stop.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
