Easy
15-30 minutes
It is a genuine item that is supplied by the original equipment manufacturer for use with Makita finishing sanders. This is an identical replacement for a missing or damaged lever that helps to secure the sandpaper, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality component is sold individually.
Lever 321869-2
OEM part for: Makita
Part Number: 321869-2
$4.99
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Lever will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 2 of 2 matching models.
2 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Sander
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lever
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Pad and lever replacement
Eunice - August 31, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced pad and lever on sander with screw driver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Refurb an older Makita BO4550 sander
David - August 7, 2023
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Picked this up used sander to complete a refinishing project. It's an oldie but goodie. It had good bones, extremely well constructed. Ultimately I replaced the sandpaper clamps and retaining clips, the nylon feet that hold the base, the brushes and a seal.
Cleanup was extensive, I used 600 grit wet/dry paper VERY lightly on the armature to remove accumulated oxidation. All the bearings were tight, no attention needed.
Assembled the old sander, fortunately there are plenty of sources of exploded parts list to make sure you gat it back together properly.
In the end, I now have a Makita 1/4 sheet sander that runs like brand new and since all the wearable parts have been replaced should last a very long time. You would be hard pressed to find a new unit with this quality unless you plan to spend a great deal.
Cleanup was extensive, I used 600 grit wet/dry paper VERY lightly on the armature to remove accumulated oxidation. All the bearings were tight, no attention needed.
Assembled the old sander, fortunately there are plenty of sources of exploded parts list to make sure you gat it back together properly.
In the end, I now have a Makita 1/4 sheet sander that runs like brand new and since all the wearable parts have been replaced should last a very long time. You would be hard pressed to find a new unit with this quality unless you plan to spend a great deal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The listed parts were defective. Replaced now good as new.
John - August 19, 2020
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, No other tools required
Parts Used
Disassembled and removed defective parts and replaced with new. Works great now. Thank you
Did you find this story helpful?
Thanks for voting and helping fellow customers!
sander would not run
Slotteo - April 15, 2019
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, none
took the sander apart and put in new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lever broken and sander Pad Worn out
Gaetano - March 25, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Power Drill
Parts Used
Remove pad screws and housing, in order to get to the lever
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
